Model 6144
Figure 1
Wireless Strobe
Chime
This package includes (Style of push button and chime may vary from illustration):
•Wireless strobe chime
•Wireless push button with battery
•Hardware pack
WARNING: To prevent possible SERI- OUS INJURY or DEATH:
•NEVER allow small children near batteries.
•If battery is swallowed, immediately notify doctor.
1.Install alkaline type A23 12 volt push button battery (included). Remove back of case by pushing in tab on bottom with a small screw- driver (see Figure 1). See diagram inside push button for correct battery orientation. Note: If batteries are preinstalled, remove orange battery tab.
2.Plug in wireless chime. To reduce the risk of electrical shock, this equipment has a polar- ized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not attempt to bypass this safety feature.
3.Test range. Temporarily position push button where you want it mounted. Press push button to verify chime and push button work properly. If chime does not sound, see Troubleshooting.
DANGER: Electric shock hazard. Do not open chime. No serviceable components inside. If strobe fails to flash, replace chime.
© 2008 HeathCo LLC |