Heath Zenith 6144 manual Strobe/Tune Settings

Strobe/Tune Settings

WARNING: Disconnect chime unit from power source before opening code access door. Close door and replace screw before reconnecting to power.

Your wireless chime has different selectable tunes: Ding-Dong(two flashes/two notes/two flashes) or Westminster (eight flashes/eight notes/eight flashes). The factory setting is for the Westminster tune. This tune can be changed by following the instructions below.

•Ding-Dong(Two note tune)

Strobe will flash two times, play the two note tune, then flash two more times.

Inside Push Button: Add a jumper to location 8.

•Westminster (Eight note tune)

Strobe will flash eight times, play the eight note tune, then flash eight more times.

Inside Push Button: Remove jumper from location 8.

Remove screw to open access door

1234567

Back of Chime

1 2 3 4 5 6 7	Tune Setting
8
Inside Push
Button

Note: Some models might require the use of tweezers to remove and replace the jumpers.

Figure 4

598-1143-02 -3-