Niles Audio CM5MP Five to 100 watts per channel, 55Hz to 20kHz, +/- 3dB on axis, 10-5/8 diameter

Page 11

Specifications

Specifications

CM8MP

.

Driver Compliment

8" talc-filled polypropylene woofer with treated foam rubber surround

3/4" fluid-cooled ultra-wide dispersion Kaladex® tweeter in a custom pivoting coaxial enclosure

Recommended Amplifier Power

Five to 100 watts per channel

Nominal Impedance

6 Ohms

Frequency Response

55Hz to 20kHz, +/- 3dB (on axis)

Tweeter Adjustment

Up to 20° pivot angle

Sensitivity

89dB for 2.83 volts of Pink Noise

Overall Exterior Frame Dimensions

10-5/8" diameter

Depth Behind Wall

3-3/4" deep (based on 1/2" drywall)

Cut-Out Dimensions

9-1/2" diameter

Wiring Requirements

We recommend 16 to 18 gauge stranded wire for up to 80 feet, 14 gauge stranded wire for up to two hundred feet.

Connectors accommodate 12 to 18 gauge stranded wire.

PLEASE FILL OUT THE WARRANTY REGISTRATION CARD ON THE REVERSE SIDE, DETACH, AND MAIL TO:

Niles Audio Corporation

Warranty Registration Dept.

P.O. Box 160818

Miami, Florida 33116-0818

DETACH HERE

19

Image 11

Contents CM5MP Introduction Table of ContentsRecommended Amplifier Power Installation ConsiderationsInstallation Considerations Easy InstallationSpeaker Placement Varying Listening Position Placement for Varying Listening PositionsPlacement for Home Theater Rear Applications Boundary EffectConcealing Speaker Wire Existing Walls Installation FundamentalsInstallation Fundamentals Running the Speaker Wire in New ConstructionUnobstructed space for speaker wiring Speaker Location Volume Control StereoMounting The New Construction Bracket Installation in New ConstructionInstallation in Existing Construction Insulating the Wall CavityPainting the Speakers Final Installation in New or Existing ConstructionSpeaker Phase Operations SpecificationsSpecifications Operation10-5/8 diameter Five to 100 watts per channel55Hz to 20kHz, +/- 3dB on axis 89dB for 2.83 volts of Pink NoiseLimited Warranty Limited Warranty