Chime Replacement Installation

IMPORTANT: Proper installation requires a diode on the front door push button. See Diode Installation Instructions (page 5) after completing steps 1 through 10 below.

Note: Electrical work must be in accordance with national and local electrical codes. If in doubt, consult a qualified electrician.

1.Verify transformer power rating. Power must be supplied from a 16 Volt AC, 10 Watt or a 16 Volt AC, 15 Watt transformer.

2.Remove cover from existing chime.

3.Label all wires before disconnecting. Using masking tape, mark each wire according to existing chime terminal markings.

•“F” – Front Push Button Wire

•“T” – Transformer Wire

•“R” – Rear Push Button Wire*

4.Disconnect all wires from existing chime.

5.Remove existing chime base from wall.

6.Determine proper chime base orientation. The chime cover style will determine orientation.

7.Determine cover mounting type. For hanging type covers, cover pin should be exposed (see Figures 1 and 3).

Continued

- -	598-1224-01
Cover Pin (Used for	Base Orientation
Hanging Type Covers)	Marking

Volume Control

Front Door Tune

Selection Switch

(On Select Models)

“A” - Westminster

“B” - Whittington

Mounting

Hole (x4)

Transformer and

Push Button Wire

Connections

Wire Entrance Hole

Figure 1 - Electronic Chime Identification

(TR-0070-BX Base Shown)

Illustrations may vary from actual chime unit.

598-1224-01 specifications

The Heath Zenith 598-1224-01 is a sophisticated wireless doorbell system that combines modern technology with user-friendly design, making it a popular choice for homeowners seeking convenience and reliability. This innovative doorbell system is not just an ordinary notification device; it enhances home security and functionality.

One of the standout features of the Heath Zenith 598-1224-01 is its wireless design, which allows for easy installation without the need for extensive wiring or electrical work. This feature is particularly advantageous for those who wish to install a doorbell in locations that may be difficult to reach with traditional wired systems. The unit operates on a reliable radio frequency, ensuring that the signal between the doorbell and the chime unit is strong and unwavering.

The Heath Zenith 598-1224-01 is equipped with a range of customizable chime sounds, providing homeowners the ability to choose a melody that suits their taste. With multiple tone options, the doorbell can be tailored to deliver a unique welcoming sound, adding aesthetic value to the home. Additionally, volume controls are included, allowing users to adjust the chime's loudness to their preference, ensuring that it can be heard throughout the house.

In terms of technology, the Heath Zenith 598-1224-01 features state-of-the-art motion detection capabilities, which enhances its functionality as a security device. The system can detect visitors before they even reach the door, alerting homeowners to potential guests or package deliveries. This preemptive notification feature can be invaluable for those who prioritize security and wish to monitor their entrance points.

Another key characteristic of the Heath Zenith 598-1224-01 is its weather-resistant design, enabling it to withstand various outdoor conditions. This durability ensures that the doorbell remains functional and visually appealing, regardless of the elements it faces.

Overall, the Heath Zenith 598-1224-01 is a versatile, reliable, and stylish addition to any home. With its wireless operation, customizable chimes, and advanced motion detection features, it offers homeowners the perfect blend of convenience, security, and personalization, making it a smart choice for modern living.