Heath Zenith 6168 manual Tune Settings

Tune Settings

Your Heath®/Zenith wireless chime has different selectable tunes: Ding (one note), Ding-Dong(two note), or Westminster (eight note) (Available on se- lected Heath®/Zenith chimes). The factory setting is for the Ding-Dong tune (or Westminster, when available). This tune can be changed by following the instructions below.

•Ding (one note tune)

Sensor: Add a jumper to location 8.

•Ding-Dong(two note tune)

Sensor: Remove jumper from location 8.

Chime: Remove jumper from location 8.

•Westminster (Eight note tune) (Available on selected Heath®/Zenith chimes)

Sensor: Remove jumper from location 8.

Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities.You may pur- chase any Heath®/Zenith wireless push button for a second entrance.

Remove screw to open access door

12345678

Tune Setting (Not

used on all models)

Tune Setting

12345678

Inside
Sensor	Back of Chime

Note: Some models might require the use of tweezers to remove and replace the jumpers.

- - 595-5724-04