Heath Zenith 6168 manual Mount sensor, Sensor onto back cover

Use Optional	5. Mount sensor.
Spacer if Needed	Screw Mounting: Attach sensor back cover to
	wall using two short screws (provided). Snap
	sensor onto back cover.
	Tape Mounting: Apply foam tape to the sensor
	back cover. Stick sensor back cover to frame of
	door in desired position. Snap sensor onto back
	cover.
	6. Mount magnet. Repeat step 5 to attach magnet
	(and spacer if needed) to door using two screws
	(provided). Note: If using spacer, use the two
	long screws (provided).

595-5724-04 - -