Wireless Christmas
Chime
This package includes (Style of push button and chime may vary from illustration):
•Wireless Christmas bell chime
•Wireless push button with battery
•Hardware pack
This chime requires 3 "AA" alkaline batteries (not included). In typical use, alkaline batteries will last up to 6 months.
Figure 1
Keyhole
Jumpers
Figure 2
WARNING:To prevent possible SERIOUS INJURY or DEATH:
•NEVER allow small children near batteries.
•If battery is swallowed, immediately notify doctor.
1.Install alkaline type A23 12 volt push button battery (included). Remove back of case by pushing in tab on bottom with a small screwdriver (see Figure 1). See diagram inside push button for correct battery orientation. Note: If batteries are preinstalled, remove orange battery tab.
2.Open chime battery compartment. Press in latch on rear of chime and lift off battery cover (see Figure 2).
3.Install 3 alkaline "AA" batteries. Make sure batteries are oriented properly (see Figure 3).
4.Test range. Temporarily position chime and push button where you want them mounted.
Press push button to verify chime and push but- ton work properly. If chime does not sound, see
Troubleshooting.
3 12 C B A
Figure 3
© 2008 HeathCo LLC |