Heath Zenith 598-1000-07 manual Keyhole Mounting, Remove batteries from chime

Page 2
Figure 4

4.Test range. Temporarily position chime and push but-

ton where you want it mounted. Press push button to verify chime and push button work properly. If chime does not sound, see Troubleshooting.

5. Adjust volume control. Adjust volume control to desired volume (see Figure 3).

6.Mount push button. Use either screws or double

sided tape to mount push button.

• Screw Mounting: To mount with screws, remove back of case by pushing in tab on bottom with a small screwdriver (see Figure 1). Note: Remove material in screw holes (if needed) before mounting with screws. Attach back of case to door jamb or wall (see Figure 4). Snap front of push button on.

•Tape Mounting: When attaching push button using double sided tape, make sure the surface of the door jamb or wall is clean.

7.Mount chime. Determine mounting location.

The chime base can be mounted in two different ways.The base can be mounted using one keyhole and one mounting hole or two mounting holes. The base may be mounted horizontally or vertically depending upon the specific model purchased.

Keyhole Mounting:

•Remove batteries from chime.

•Drill one 7/32" diameter pilot hole for keyhole wall anchor and insert anchor. Note: Keyhole slot is located about 1" (25 mm) from top of chime.

•Mount keyhole screw to wall leaving about 1/8" (3 mm) of the screw threads exposed (see Figure 5).

•Using keyhole on back of chime base, hang base on screw.

•Level chime base.

•Using the horizontal slot located in the bottom of the battery compartment, mark location for second screw.

•Drill one 7/32" diameter pilot hole for wall anchor and insert anchor.

•Insert second screw through the horizontal slot and attach to wall.

•Verify chime is level and tighten screws securely.

•Replace batteries (see Figure 3).

•Snap cover onto chime as shown in Figure 7.

-2-

598-1000-07

Page 1 Page 3
Image 2
Page 1 Page 3
Contents 6250 Series Alkaline batteries will last up to three yearsKeyhole Mounting Remove batteries from chimeInside Chime Inside Push Tune SettingsInside Chime ButtonChime does not sound TroubleshootingCode Setting Vol Technical Service Regulatory InformationFive Year Limited Warranty Nunca deje que los niños estén cerca de las baterías Serie 6155 y SerieUso normal, las pilas alcalinas durarán hasta tres años Montaje del orificio de alineación Retire las baterías pilas de la campanaFigura 5 Parte de atrás de la Campana Dentro del Programación del tonoCampana Interna PulsadorLa campana no suena Configuración de CódigosAnálisis de Averías Dentro del Pulsador Servicio Técnico Información RegulatoriaGarantía Limitada a 5 Años Typique, les piles alcalines durent trois ans Installez 3 piles alcalines « D »Série 6155 et série Au moyen de vis Pour faire l’installation avec les vis Installation au moyen des trous de serrureIntérieur du carillon Unité de Bouton-poussoir Intérieure Réglage de la mélodieIntérieur du carillon 3 4 5 6 7 Réglage des codes DépannageLe carillon ne sonne pas Intérieur du carillon Unité deService Technique Renseignements de règlementsGarantie Limitée DE 5 ANS

598-1000-07 specifications

The Heath Zenith 598-1000-07 is a versatile and efficient outdoor security light that brings a blend of functionality and style to your home's exterior. Designed to enhance safety and provide illumination for your property, this fixture stands out with its advanced features and robust technological capabilities.

One of the main features of the Heath Zenith 598-1000-07 is its motion sensor technology. Equipped with a high-quality PIR (Passive Infrared) sensor, this outdoor light can detect motion up to 30 feet away. The sensor is adjustable, allowing homeowners to customize the sensitivity and range according to their specific needs. This feature ensures that the light turns on only when motion is detected, enhancing energy efficiency and extending the lifespan of the bulb.

The design of the Heath Zenith 598-1000-07 is both functional and attractive. The fixture boasts a sleek and modern housing, which is available in different finishes to complement various outdoor decors. Additionally, the light is constructed from durable materials that can withstand harsh weather conditions, ensuring longevity and reliability.

Moreover, the Heath Zenith 598-1000-07 utilizes LED technology, providing bright illumination while using significantly less energy compared to traditional bulbs. The use of LED not only translates to lower electricity bills but also means that homeowners will not have to replace bulbs as frequently, making it a low-maintenance option for outdoor lighting.

This security light also features adjustable settings, including a timer that allows users to set the duration for which the light remains on after being activated. This is particularly useful for areas that require temporary illumination, such as walkways or driveways. The light can be set to stay on anywhere from a few seconds to several minutes, providing flexibility and convenience.

Overall, the Heath Zenith 598-1000-07 is a practical and stylish choice for homeowners looking to enhance their outdoor security lighting. With its advanced motion sensing technology, durable construction, and energy-efficient LED capabilities, this outdoor light is an investment that adds both safety and aesthetic value to any property.
Top Page Image Contents