Heath Zenith 598-1000-07 manual Troubleshooting, Chime does not sound, Code Setting

Page 5

Troubleshooting

A. Chime does not sound:

•Make sure push button and chime codes are the same (see Figure 9).

•Check orientation of push button and chime batteries. (See diagram inside push button and chime for correct battery orientation.)

•Check charge of push button and chime batteries, replace if necessary.

B.Chime sounds when not intended (false triggers): Chime is receiving interference from another wireless device; change the code setting (see Code Setting below).

C.Batteries seem OK, but the chime does not work when installed:

•Do not mount chime or push button on metal or near metal studs. This reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to move chime or push button off metal surface.

•Concrete floors may reduce range. Move chime away from floor.

•Try locating chime closer to push button.

D.Code Setting:

It is recommended to only change one code position at a time and then check to see if system is functioning properly.

1.Open the cases and locate the jumpers on both the push button and chime (see Figure 9).

2.The push button and chime both have eight different jumper locations. Jumper positions 1 through 7 are used for setting the code.

598-1000-07

-5-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Alkaline batteries will last up to three years 6250 SeriesRemove batteries from chime Keyhole MountingInside Chime Inside Chime Tune SettingsInside Push ButtonChime does not sound TroubleshootingCode Setting Vol Regulatory Information Technical ServiceFive Year Limited Warranty Nunca deje que los niños estén cerca de las baterías Serie 6155 y SerieUso normal, las pilas alcalinas durarán hasta tres años Retire las baterías pilas de la campana Montaje del orificio de alineaciónFigura 5 Parte de atrás de la Campana Campana Interna Programación del tonoDentro del PulsadorLa campana no suena Configuración de CódigosAnálisis de Averías Dentro del Pulsador Información Regulatoria Servicio TécnicoGarantía Limitada a 5 Años Typique, les piles alcalines durent trois ans Installez 3 piles alcalines « D »Série 6155 et série Installation au moyen des trous de serrure Au moyen de vis Pour faire l’installation avec les visIntérieur du carillon Unité de Bouton-poussoir Intérieure Réglage de la mélodieIntérieur du carillon 3 4 5 6 7 Réglage des codes DépannageLe carillon ne sonne pas Unité de Intérieur du carillonRenseignements de règlements Service TechniqueGarantie Limitée DE 5 ANS

598-1000-07 specifications

The Heath Zenith 598-1000-07 is a versatile and efficient outdoor security light that brings a blend of functionality and style to your home's exterior. Designed to enhance safety and provide illumination for your property, this fixture stands out with its advanced features and robust technological capabilities.

One of the main features of the Heath Zenith 598-1000-07 is its motion sensor technology. Equipped with a high-quality PIR (Passive Infrared) sensor, this outdoor light can detect motion up to 30 feet away. The sensor is adjustable, allowing homeowners to customize the sensitivity and range according to their specific needs. This feature ensures that the light turns on only when motion is detected, enhancing energy efficiency and extending the lifespan of the bulb.

The design of the Heath Zenith 598-1000-07 is both functional and attractive. The fixture boasts a sleek and modern housing, which is available in different finishes to complement various outdoor decors. Additionally, the light is constructed from durable materials that can withstand harsh weather conditions, ensuring longevity and reliability.

Moreover, the Heath Zenith 598-1000-07 utilizes LED technology, providing bright illumination while using significantly less energy compared to traditional bulbs. The use of LED not only translates to lower electricity bills but also means that homeowners will not have to replace bulbs as frequently, making it a low-maintenance option for outdoor lighting.

This security light also features adjustable settings, including a timer that allows users to set the duration for which the light remains on after being activated. This is particularly useful for areas that require temporary illumination, such as walkways or driveways. The light can be set to stay on anywhere from a few seconds to several minutes, providing flexibility and convenience.

Overall, the Heath Zenith 598-1000-07 is a practical and stylish choice for homeowners looking to enhance their outdoor security lighting. With its advanced motion sensing technology, durable construction, and energy-efficient LED capabilities, this outdoor light is an investment that adds both safety and aesthetic value to any property.
Top Page Image Contents