Mounting Suggestions, NEW Installation Wiring

MOUNTING SUGGESTIONS

•Power must be supplied from a 16 Volt, 10 Watt transformer or 16 Volt, 15 Watt transformer (Heath®/ Zenith models 122C, 121AC, or 125C).

•Mount door chime in a central location so it can be heard throughout the home (for new installa- tions).

•See actual unit for orientation of base (see Figure 1).

•Always use mounting wall anchors.

•Use all mounting holes located at four corners of base.

•Route the wires through the wire entrance hole (see Figure 1).

NEW INSTALLATION WIRING

WARNING: Turn power off at fuse or circuit breaker before installing transformer. Follow all national and local codes.

1.Mount Transformer: Transformers should be mounted on or near a junction box. They can also be mounted to the electrical service panels. Junction boxes in utility rooms, crawl spaces, or basements are preferred. Avoid attic locations.

2.Install 16 Volt, 10 Watt transformer according to the instructions supplied with transformer.

3.Run two No. 20 AWG or better bell wires (Heath®/Zenith No. 196C or No. 199C accessory wire) to the chime location. Strip away 1/2" of insulation from end of wires. Connect each wire to transformer (see Figure 2).

4.Label Transformer Wires: Using masking tape or wire tags provided on packaging, label one wire “T” and the other “C”.

5.Mount push button(s) to door frame(s). Run two No. 20 AWG bell wires from push button(s) to the chime location. Strip away 1/2" of insulation from end of wires. Connect each wire to push button(s) (see Figure 2).

Label Front Push Button Wires: Using masking tape or wire tags provided on packaging, label one wire “F” and the other “C”.

Label Rear Push Button Wires: Using masking tape or wire tags provided on packaging, label one wire “R” and the other “C”.

6.At the chime, pull all wires through wall cavity and out through a 1/2" hole in the wall board. Route wires through wire entrance hole.

7.Mount chime base to wall using screws provided.

8.Strip away 1/2" of insulation from end of wires. Connect wire “F” to the screw terminal marked “FRONT”. Connect wire “T” to screw terminal marked “TRANS”. Connect wire “R” to screw terminal marked “REAR” (see Figure 2).

9.Twist together the wires labeled “C” and secure them with a UL approved wire nut.

10.Place chime cover securely over base (see Figure 5).

11.Restore power. Press push button(s) to test chime.

4	598-1142-01

121AC, 125C, 122C specifications

Heath Zenith has established a reputation for innovation and quality in the outdoor lighting and security market with its range of products designed to enhance safety and convenience around the home. Among their notable offerings are the Heath Zenith 122C, 125C, and 121AC, each boasting unique features and advanced technologies.

The Heath Zenith 122C is a motion-activated security light designed with both functionality and aesthetics in mind. This model features a powerful 180-degree motion sensor that detects movement up to 30 feet away. One of its standout technologies is the adjustable sensitivity feature, which allows users to customize the detection range according to their needs. Additionally, the 122C offers dual lights that provide excellent illumination for entryways, garages, and outdoor spaces, ensuring that any movement is clearly visible.

Similarly, the Heath Zenith 125C enhances outdoor security with a robust design and advanced features. This model is equipped with a 240-degree motion sensor, which provides a wider range of coverage compared to its counterpart. The 125C also includes a convenient test mode that makes it easy for users to adjust the positioning of the sensor and lights to achieve optimal performance. Users appreciate the weather-resistant casing that protects the light from environmental elements, ensuring durability and longevity.

The Heath Zenith 121AC light features a combination of innovation and ease of use. It stands out for its integrated dusk-to-dawn sensor, which automatically activates the light at sunset and turns it off at sunrise, providing hassle-free operation. This feature not only enhances convenience but also contributes to energy savings by ensuring the light is only on when needed. The 121AC is designed with LED technology, making it energy-efficient, providing bright illumination, and reducing maintenance costs due to the extended lifespan of LEDs.

All three models come with adjustable light timers that allow users to set how long the light stays on after being triggered. This ensures flexibility for various applications, whether for security purposes or general outdoor lighting. The Heath Zenith 122C, 125C, and 121AC lights exemplify the perfect blend of practical features and advanced technologies, making them excellent choices for homeowners looking to improve safety and illumination around their properties. With reliable performance and user-friendly features, these models reflect Heath Zenith's commitment to quality and innovation in outdoor lighting solutions.