Heath Zenith 595-5684-09 manual Snap front of push button on

Page 2

Chime Volume Control

(Selected Chimes)

Jumper Access Door (See

Tune or Code Section)

Figure 2

Figure 3

4.Adjust volume control (Available on se- lected chimes). Unplug chime and adjust volume control to desired volume (see Figure

2). Plug chime back into wall outlet.

5.Mount push button. Use either screws or double sided tape to mount push button.

•Screw Mounting: To mount with screws, remove back of case by pushing in tab on bottom with a small screwdriver (see Figure 1). Note: Remove material in screw holes (if needed) before mounting with screws. Attach back of case to door jamb or wall (see

Figure 3). Snap front of push button on.

•Tape Mounting: When attaching push but- ton using double sided tape, make sure the surface of the door jamb or wall is clean.

-2-	595-5684-09

Image 2

Contents Electrical shock, this equipment has a polar Batteries are preinstalled, remove orangeBattery tab Ized plug one blade is wider than the otherSnap front of push button on Inside Push Button Back of Chime Tune Settings12345678 Chime does not sound TroubleshootingCode Setting Inside Push Technical Service Regulatory InformationLimited Warranty Campana inalámbrica enchufable. Para Figura Pulsador Programación del tonoDentro del La campana no suena Configuración de CódigosAnálisis de Averías Parte de Atrás de la Campana Dentro del Pulsador Servicio Técnico Información RegulatoriaGarantía Limitada Demandez à un électricien compétent dins La languette orangeCarillon enfichable, sans fil. Pour réduire Contourner cette fonction de sécurité595-5684-09 Poussoir intérieure Arrière du carillon Réglage de la mélodieUnité de bouton Dépannage Le carillon ne sonne pasArrière du carillon Unité de bouton Poussoir intérieure Service Technique Renseignements de règlementsGarantie Limitée Séries 6140 et 6160 Séries Ans595-5684-09 595-5684-09 595-5684-09