Wireless Chime
This package includes (Style of push button and chime may vary from illustration):
•Wireless chime
•Wireless push button w/battery
•Hardware pack
You'll need to buy 2 “C” alkaline batteries for the chime. In typical use, alkaline batteries will last up to one year.
1.Install alkaline type A23 12 volt push button battery. Remove back of case by pushing in tab on bottom with a small screwdriver. Make sure battery is oriented properly (see page 3).
Case Style “A”
2.Open chime case . Press in catch on bot- tom of chime and lift the case open.
3.Install 2 alkaline “C” batteries. Make sure batteries are oriented properly.
12345678 |
Case Style “B”
4.Test range. Temporarily position chime and push button where you want them mounted. Press push button to verify chime and push button work properly. If chime does not sound, see Troubleshooting.
5.Mount push button and chime.
Use either screws or double sided tape to mount push button.
To mount with screws, remove back of case by pushing in tab on bottom with a small screwdriver.
© 2007 HeathCo LLC |