BEA Dip Switch I manual 80.0203.01, Push to Test, TUC Scale Date Sheet None

BODYGUARD (See Note #4)

PUSH TO TEST

LH DOOR AUX. SWITCH #4

LOCATED ON TOP OF OPERATOR

Common

N/O

N/C

RH DOOR

AUX. SWITCH #4

LOCATED ON TOP

OF OPERATOR

Common

N/O

N/C

24 V

TRANSFORMER

BLACK

WHITE

STANLEY MP

CONTROL

NOTES: 1) MAGIC FORCE AUX. SWITCH #4 SHOULD OPEN AT APPROX. 65-70 DEGREES. FOR MAGIC SWING REFER TO INHIBIT SWITCH BEA PT# 10 SSINHL OR 10SSINHR.

2)DOOR CONTROL SW2 SWITCH BANK SET DIPSWITCH # 1 & 3 TO THE OFF (TIMER) POSITION.

3)RH MOTOR SHOWN, REVERSE MOTOR SWITCH ON PARALINK FOR LH MOTOR.

4)BODYGUARD MUST BE PROGRAMMED TO RELAY VALUE 2. DEFAULT IS 1.

5)INSTALL JUMPER AT CONTROL ON TERMINAL 6 & 8 IF NO BREAKOUT SWITCH.

IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC. FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS, CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM

100 ENTERPRISE DRIVE PITTSBURGH, PA 15275 PHONE: (412) 249-4100 FAX: (412) 249-4101 EMAIL: www.beasensors.com

TITLE: PARALLINK, STANLEY MP CONTROL, MAGIC FORCE OPERATOR

SIZE:	DRAWN BY:	REV BY:	PART NO:	80.0203.01
A	TUC	TUC
	SCALE:	DATE:	SHEET
	NONE	19 SEP 2005	1 OF 1