Rev. A.3, 5/00 | Page- 8 |
FIG. 8: USE OF THE UMB BRACKET WITH THE MODEL 34 MAGNALOCK
NOTE HOW BRACKET CAN BE REVERSED TO COPE WITH DIFFERENT STOP THICKNESSES
|
| BLADE |
|
|
|
|
HEADER | STOP | HEADER |
| STOP | ||
|
|
|
|
|
|
|
|
| UMB BRACKET |
|
|
| UMB BRACKET |
|
|
|
|
|
|
|
DOOR |
| DOOR |
|
|
| |
|
| MAGNET |
|
|
| MAGNET |
|
| STRIKE |
|
| STRIKE |
ALUMINUM DOOR AND FRAME | ALUMINUM DOOR AND FRAME |
WITH BLADE STOP | WITH BLADE STOP |
THE TWO LARGER HOLES ARE FOR THE
CABLE EXIT. THE TWO THREADED HOLES
ACCEPT THE MAGNET MOUNTING SCREWS.
THE REMAINING FIVE HOLES ACCEPT
DIFFERENT FASTENER TYPES TO MOUNT
TO DIFFERENT HEADERS.
2.5.3 SOLID GLASS DOOR MOUNTING
The Magnalock is an excellent choice for securing 100% glass doors with no aluminum rail. The magnet is suspended in normal fashion from the header and the difficulty in the installation is mounting the strike plate on the glass door as glass cannot be drilled. This is accomplished by using Securitron's model GDB (or GDBM with metric fasteners) Glass Door Bracket and model AKG Adhesive Kit for Glass (see Figure 7). The GDB bracket will work with either the model 32, model 62, or model 82 Magnalock (but not with the model 34). The bracket is affixed to the glass surface by a special adhesive and the strike screws into the bracket conventionally. The adhesive provides a permanent bond stronger than the holding force of the Magnalock.
Note that we have said "100% glass door". Some doors that appear to be glass are actually laminated with plastic. If the Magnalock with glass door bracket is used on this type of door, it is possible that failure will occur via delamination.
In some cases the header of a glass door is vertical glass. The magnet can be mounted on such a header by using a 3" X 3" aluminum angle bracket (part number