Installation
CabinetInstallation
1.Open the window. Mark a line on the center of the window stool between the side window stop moldings.
Loosely attach the sill bracket to the support bracket using the carriage bolt and the lock nut.
Sill
Bracket
Carriage Bolt
Figure 5
Support Bracket
Lock nut
2.Attach the sill bracket to the window sill using the screws (Type B).
Carefully place the cabinet on the window stool and align the center mark on the bottom front with the center line marked window stool.
Cabinet
Track hole
Support
Bracket
Carriage bolt and lock nut
Figure 6
Machine screw (Type D) and lock nut
Outer edge of window sill
Screw(Type B)
Sill bracket
3.Using the
CAUTION: Do not drill a hole in the bottom pan. The unit is designed to operate with approximately 1/2" of water in bottom pan.
4.Pull the bottom window sash down behind the Top retainer bar until they meet.
NOTICE
1.Do not pull the window sash down so tightly that the move- ment of Frame curtain is restricted. Attach the cabinet to the window stool by driving the screws (Type B) through the cabinet into window stool.
2.The cabinet should be installed with a very slight tilt downward toward the outside.
Top |
|
retainer |
|
bar | Window stool |
| |
| Front angle |
Figure 7
Window sash Top retainer bar
Cabinet
Frame curtain
Figure 8
Sash track
Front Angle
Screw(Type B)
Figure 9
10Room Air Conditioner