Operating Instructions
RemoteController
CAUTION: The Remote Controller will not function properly if strong light strikes the sensor window of the air conditioner or if there are obstacles between the Remote Controller and the air conditioner.
Power
Operation starts when this button is pressed and stops when you press the button again.
Temperature Control
The thermostat monitors room temperature to maintain the desired temperature.
The thermostat can be set between 60F~86F (16C~30C).
The unit takes an average of 30 minutes to adjust the room temperature by 1F.
Fan Speed
For increased power while cooling, select a higher fan speed.
3 steps: High Low Med
On/Off Timer
Power
Temp
Fan Speed
Timer Mode
Auto
Swing
The timer can be set to start and stop the unit in hourly increments (up to 12 hours).
Operation Mode Selector
Select cooling mode to cool the room. Select energy saver mode for energy saving operation.
Select fan mode for basic ventilating fan operation. Select dry mode for dry operation.
How to Insert Batteries
1. Remove the cover from the back of the remote controller
2. Insert two batteries.
Be sure of the polarity when installing the batteries.
Be sure that both batteries are new. 3.
Do not use rechargeable batteries. Such batteries differ from standard dry cells in shape, dimensions, and performance.
Remove the batteries from the remote controller if the air conditioner is not going to be used for an extended length of time.
18Room Air Conditioner