Connecting the cable to Outdoor Unit | LG Electronics 5CSV2-03A

15. Installation

3)Connecting the cable to Outdoor Unit

1.Remove the control cover from the unit by loosening a screw.

Connect the wires to the terminals on the control board individually as specified.

2.Secure the cable onto the control board with the hold- er (clamper).

3.Refix the cover control to the original position with the screw.

4.Use a recongnized circuit breaker 20A(18k, 24k) between the power source and the unit. A disconnec- tion device to adequately disconnect all supply lines must be fitted.

Outdoor unit

Terminal block

Over 5mm

Holder for
power supply
cord	Power supply
	cord
	Connecting
	cable
Cover control	Holder for
	connecting
	cable

VC/VD Chassis Models

ELECTRIC WIRE SIZE

	OUTDOOR	INDOOR FUSE	CIRCUIT	ELECTRIC WIRE SIZE (SQMM)
MODEL	FUSE CON-	INDOOR FUSE	CIRCUIT	ON THE	IN PIPE
MODEL	FUSE CON-	CONTROL	BREAKER	ON THE	IN PIPE
	TROL	CONTROL	BREAKER	GROUND 60°C	75°C
	TROL			GROUND 60°C	75°C

36k	10A / 250V	0.5A / 250V	30A / 3P.	-	6
48k/60k	10A / 250V	0.5A / 250V	50A / 3P.	-	6

CAUTION

After the confirmation of the above conditions, prepare the wiring as follows:

1)Never fail to have an individual power specially for the air conditioner. Guidence for wiring is in the circuit diagram which is pasted on the inside of control box cover.

2)Provide a circuit breaker switch between power source and the unit.

3)The screw which fasten the wiring in the casing of electrical fittings are liable to become loose due to vibrations, to which the unit is subjected during the course of transportation. Check them and make sure that they all are tightly fastened. (If they are loose, it could burn-out the wires.)

4)Confirm specification of power source.

5)Confirm electrical capacity is sufficient.

6)Be sure that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate.

7)Confirm the cable thickness should be proper as specified in the power sources specification. (Particularly note the relation between cable length and thickness.)

8)Never fail to equip a leakage breaker where it is wet or moist.

9)The following troubles would be caused by voltage drop-down.

•Vibration of a magnetic switch, damage on the contact point there of, fuse breaking, disturbance to the normal function of a overload protection device.

•Proper starting power is not given to the compressor.

10)The means for disconnection from a power supply shall be incorporated in the fixed wiring and have an air gap contact separation of at least 3mm in each active(phase) conductors.

82Ceiling & Floor, Ceiling Suspended (50Hz, R22)

5CSV2-03A specifications

LG Electronics has established itself as a leader in consumer electronics, and the 5CSV2-03A model exemplifies the brand's commitment to innovation and performance. This model showcases a blend of advanced technologies and user-friendly features, making it a standout choice for modern households.

One of the key attributes of the LG 5CSV2-03A is its energy efficiency. It operates with a high Energy Efficiency Ratio (EER), which ensures that users can enjoy powerful performance while minimizing energy consumption. This not only helps in reducing electricity bills but also aligns with global efforts toward sustainability.

The 5CSV2-03A is equipped with cutting-edge inverter technology, allowing it to adjust the compressor's speed based on cooling demand. This leads to more consistent temperature control, quieter operation, and reduced energy use. Users will appreciate the swift cooling capabilities, making uncomfortable heat a thing of the past.

Another significant feature is the air purification technology. The model integrates advanced filters that capture airborne particles, allergens, and even odors, contributing to a healthier living environment. The built-in air quality monitoring system provides real-time feedback, helping users maintain optimal indoor air quality.

Convenience is taken to the next level with smart connectivity options. With Wi-Fi capabilities, users can control the 5CSV2-03A via a smartphone app, offering the flexibility to adjust settings from anywhere within the home. This feature also enables scheduling operations, allowing users to pre-cool their spaces before arriving home.

The design of the 5CSV2-03A reflects LG's dedication to aesthetics and functionality. Its sleek and modern look fits seamlessly into various interior styles, ensuring that it doesn’t detract from the overall decor. Additionally, the model boasts low noise levels, ensuring peace and comfort, especially in bedrooms or quiet spaces.

Lastly, the durability and reliability of LG products are well-known. The 5CSV2-03A is constructed with robust materials and components, ensuring longevity and performance even under demanding conditions.

In summary, the LG Electronics 5CSV2-03A combines energy efficiency, innovative technology, air purification, smart features, and an attractive design, making it an excellent choice for consumers seeking effective and stylish climate control solutions for their homes.