Tuner, Auto automatic / Manual Tuning

TUNER

AUTO ( automatic ) / MANUAL TUNING

1.Press the POWER button to switch on the system. Select the TUNER function by pressing the TUNER / BAND button on the front panel or remote control.

2.Press the TUNER / BAND button repeatedly until the desired band (FM or AM) is selected.

3.For manual tuning, quickly press and release the TUN- ING • DOWN / PREVIOUS or TUNING • UP / NEXT button to select the desired frequency.

4.For auto tuning, press and hold the TUNING • DOWN / PREVIOUS or TUNING • UP / NEXT button for 1 sec- ond. The system will search until a station of sufficient strength is found. If the station is not the desired one, simply press and hold the TUNING • DOWN / PREVI- OUS or TUNING • UP / NEXT button for 1 second again. Weak stations are skipped during automatic tuning.

NOTE: When tuning, the sound will be muted to eliminate interfering background noises. When a station is found, the audio signal will come back on. ²STEREO ² will ap- pear on the display when an FM-stereo signal is received. With weak FM stereo signals, you may hear static or back- ground noise. These noises can be suppressed by switch- ing to MONO. Simply press the ST./NOR. & MONO /H.S.D. button to select MONO mode. ² STEREO ² will disappear from the display.

PRESET MEMORY

Storing preset stations

You can store preferred stations in the TUNER¢s memory (Each 20 stations for FM and AM).

1.Press TUNER / BAND button to select TUNER func- tion and FM or AM band.

2.Press the TUNING • DOWN / PREVIOUS or TUNING

• UP / NEXT button to select the frequency you wish to store.

3.Press MEMO / C-ADJ button, the “Memory” indicator will flash, then press REPEAT / MEMO • UP or STOP / MEMO • DOWN or 0-9/+10 digit buttons to select the desired location to be preset.

4.Press MEMO / C-ADJ button again to store the station into the designated location.

5. To set another preset station, follow steps 2 to 4.

Selecting preset stations

1.Select the TUNER function and FM or AM band with the TUNER / BAND button on the front panel or remote control.

2.Press the REPEAT / MEMO •UP or STOP / MEMO

•DN button on the front panel or remote control until the required preset memory number appears. Or press the 0-9/+10 digit buttons on the remote control to se- lect the preset stations directly.