Lasko 2137 Instalación Para Ventana DE Doble, Instalación DE LAS Patas Figura, Funcionamiento

Page 2

MODELO 2137

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce

the risk of fire, electrical shock and injury to persons, including the following:

Read all instructions before using this Fan.

1.Make certain the power source conforms to the electrical requirements of the Fan.

2.Make certain that the room is equipped with a working smoke detector.

3.Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury to persons.

4.To reduce the risk of personal injury and electric shock, the Fan should not be played with or placed where small children can reach it.

5.Unplug power cord before installing, servicing, or moving the Fan.

DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING OR MOVING THE FAN. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG FAN BEFORE LEAVING THE AREA. NEVER LEAVE CHILDREN UNATTENDED WHEN THE FAN IS ON OR PLUGGED IN.

6.This Fan must NOT be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres where gasoline, paint or flammable liquids are used or stored.

7.This Fan is rated for use as a Window Fan, however, we recommend that during rain, this Fan be removed from the window.

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. Match wide blade of plug to wide slot. Fully insert. If the plug does

INSTALACIÓN PARA VENTANA DE DOBLE

ABERTURA (Figura 1)

Recomendamos mantener la malla de la ventana en su lugar.

1.Centre el ventilador en la ventana, tire de los paneles expansibles hacia afuera para hacerlos encajar con seguridad en el riel de la ventana.

2.Baje la ventana y asegure detrás del sujetador de la ventana encima del ventilador.

PARA VENTANAS VERTICALES CORREDIZAS y VENTANAS DE MARCO GIRATORIO:

Recomendamos mantener la malla de la ventana en su lugar.

1.Coloque el ventilador en la ventana con el interruptor apuntando hacia el centro de la abertura.

2.El ventilador debe encajar con seguridad contra el borde interno de la abertura de la ventana.

3.Deslice la ventana corrediza hasta tocar el borde del ventana. El borde lateral de la ventana debe encajar con seguridad detrás del borde de la caja del ventilador.

4.Para ventanas de tamaño superior a 35" (889 mm), construya un panel de madera contrachapada que encaje en el área abierta y asegure el ventilador al marco de la ventana.

5.En ventanas con marco giratorio que tengan un ancho superior a 12" (304,8 mm), será necesario construir una estructura de madera contrachapada alrededor del ventilador y luego asegurar la estructura al ventilador y al marco de la ventana.

Sujetador de

Ventana

Panel Expansible

 

 

 

 

 

 

 

 

 

 

 

Panel Expansible

de Ventana

 

 

 

 

 

 

 

 

 

 

 

 

de Ventana

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figura 1

INSTALACIÓN DE LAS PATAS (Figura 2 )

Cuando utilice el ventilador como un ventilador de piso o mesa, coloque las dos (2) patas en su lugar al deslizarlas en la parte inferior hasta que queden sujetadas.

ADVERTENCIA: Asegúrese de que las patas no estén colocadas cuando utilice el ventilador en una ventana.

not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.

This plug is a safety feature. It contains a safety device (fuse) that should not be removed. Discard product if the at- tachment plug is damaged. To reduce the risk of fire, electric shock and personal injury, DO NOT remove, replace, repair or tamper with the originally supplied plug. If the Fan does not function properly, it may be due to the safety device incorporated in this plug. Call 800-233-0268, Monday - Friday, between 8:00 a.m. and 5:00 p.m. Eastern. If the plug warning label is missing or damaged, call the toll free number for a replacement label.

8.Where possible, avoid the use of extension cords because the extension cord may overheat and cause a fire. If you must use an exten- sion cord, minimize the risk of overheating by using the shortest cord possible and ensuring that it is UL listed. NEVER use a single extension cord to operate more than one Fan. DO NOT plug Fan into any other cord connected device, such as a power strip, cord reel, surge protector, mutiple outlet adapters or outlet-type air fresheners. The use of such devices may create a fire hazard.

9.NEVER operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner.

10.NEVER insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, or damage the Fan. To reduce the risk of fire, DO NOT block or tamper with the Fan in any manner while it is in operation.

11.Always place the Fan on a stable, flat, level surface when operating, to avoid the chance of the Fan overturning. Locate the Power Cord so the Fan or other objects are not resting on it. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

12.This Fan is not intended for use in wet or damp locations. Never locate a Fan where it may fall into a bathtub or other water container. NEVER use Fan where flammable liquids are used or stored.

13.NEVER use Fan outdoors.

14.This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical require- ments for Agricultural Buildings. THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).

15.This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for Hazardous locations. THIS FAN DOES NOT MEET THE REQUIRE-

MENTS OF NEC ARTICLE 500 (2008).

REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS FAN

WITH ANY SOLID STATE SPEED CONTROL DEVICES.

SAVE THESE INSTRUCTIONS

FUNCIONAMIENTO

1.Cuidadosamente retire el Ventilador de la bolsa plástica y la caja.

Asegúrese que el enchufe encaje firmemente en el tomacorriente.

Cuando los enchufes quedan flojos en los tomacorrientes, pueden deslizarse parcial o completamente fuera del tomacorriente con un leve movimiento del cable adosado. Los tomacorrientes en este estado podrían sobrecalentarse y representar un grave peligro de incendio; si está cubierto por una cortina o tela, el riesgo de incendio es aún mayor.

2.Asegúrese que el interruptor de encendido se encuentre en la posición de APAGADO.

3.Conecte a un tomacorriente de 120 voltios AC.

4.Deslice el interruptor de encendido hasta la velocidad deseada. ALTA(2), BAJA(1)

ADVERTENCIA: ASEGÚRESE DE QUE EL VENTILADOR ESTÉ APAGADO ANTES DE INVERTIR LA UNIDAD EN LA VENTANA.

5.Cuando se invierte el ventilador en la ventana, éste sacará el aire viciado en la habitación hacia el exterior.

Vista del inferior del ventilador

Patas

parte trasera del ventilador

Figura 2

Rev. E 10/10

2

2137ES

Rev. E 10/10

7

2137ES

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Mantenimiento Servicio AL ClienteFuncionamiento Instalación Para Ventana DE DobleInstalación DE LAS Patas Figura Ments of NEC Article 500For VERTICAL, SLIDER-TYPE WINDOWS, and Casement Windows Installation for Double HungFeet Installation Figure OperationMaintenance Customer Service

2137 specifications

The Lasko 2137 is a versatile and efficient portable heater that offers comfort and convenience for home or office use. This compact unit is designed to provide quick and efficient warmth, making it an ideal choice for those chilly days when you need a bit of extra heat. With its user-friendly design and practical features, the Lasko 2137 stands out as a reliable heating solution.

One of the main features of the Lasko 2137 is its powerful heating element that can quickly reach your desired temperature. It boasts multiple heat settings, allowing users to choose the ideal level of warmth based on their preferences. This flexibility ensures that you can maintain a comfortable environment without wasting energy.

The heater is equipped with an adjustable thermostat, providing precise temperature control. This feature allows users to set the desired temperature, and the unit will automatically maintain that level, ensuring consistent warmth throughout the space. The thermostat also contributes to energy efficiency by preventing overheating and excessive energy consumption.

Another significant characteristic of the Lasko 2137 is its safety features. It comes with a built-in automatic overheat protection system, which shuts off the heater if it gets too hot. This feature gives users peace of mind, especially if the heater is left unattended. Additionally, the unit incorporates a tip-over safety switch that turns the heater off if it is accidentally knocked over, further enhancing its safety profile.

Portability is another key feature of the Lasko 2137. Its lightweight design and built-in carry handle make it easy to transport from one room to another. Whether you need extra warmth in the living room, bedroom, or office, this heater can be easily moved as needed.

The Lasko 2137 also operates quietly, making it suitable for use in various environments, including bedrooms and workplaces, without causing disruptions. Its sleek and modern design allows it to blend seamlessly with various decors, adding a touch of style while serving as a functional heating solution.

In summary, the Lasko 2137 is an efficient, portable heater that combines powerful heating performance with user-friendly features, safety mechanisms, and a stylish design. Its adjustable thermostat, multiple heat settings, and safety features make it an excellent choice for anyone looking to enhance their comfort during colder days.
Top Page Image Contents