Shark NV360 manual Mode 1 Upright Vac, To Assemble

Mode 1: Upright Vac

To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or converting modes.

WARNING: The On/Off switch is on the top of the Lift-Away®canister. Always ensure the power is OFF (“O” position) before plugging and unplugging.

b

d

a

Upper Cord	e
Storage Wrap

c

Fig. 8 Fig. 9

Fig. 10

TO ASSEMBLE:

1Place the floor nozzle on a level surface.

2Align the tube of the floor nozzle with the tube on the Lift-Away®canister and lower until you hear the two pieces click into place. (Fig. 8)

When attaching the motorized floor brush, ensure that the latching mechanism is fully locked in place to ensure electrical connection has been made.

3Attach the end of the extension wand to the tube on the back of the Lift-Away®canister until it clicks into place. (Fig. 9)

4Slide the accessory holder (a) positioned opposite the upper cord wrap, over the extension wand. Align the tab with the groove and push down.

(Fig. 10)

8 TOLL FREE: 1-800-798-7398

5Push the handle (b) onto the top of the extension wand until you hear it click into place. (Fig. 10)

6Insert the end of the stretch hose (c) into the connector on the back of the Lift-Away®canister.

(Fig. 10)

7Store the dusting brush (d) and the crevice tool (e) on the mounts of the accessory holder. (Fig. 10)

NV360_26_IB_E_121119_1.indd 8

12-11-19 8:59 AM