Mode 1 Hand Vac Accessories | Shark NH15C, NH15W instruction

Mode 1: Hand Vac Accessories

English

To remove and store Air Dam: grip the center of the Air Dam and slide out of tracks. Store Air Dam in the slot on the Hand Vac exhaust filter cover.

HAND VAC WITH HOSE

AND ACCESSORIES

For cleaning and dusting above- the-ground and for hard-to-reach places:.

1Slide Air Dam from underside of Dust Cup and store in the slot on the exhaust filter cover.

2Slide Hose Mounting Plate into grooves on the underside of the Dust

Cup so that Hose Mount assembly covers the inlet on Hand Vac.

3Click the shorter end of the Flexible

Hose into Hose Mount.

4	TOLL FREE: 1-800-798-7398

Attach cleaning tool to the other end of the Hose:

•Pet Hair Power Brush or

•2-in-1 Crevice/Dusting Tool

4While holding Hand Vac, turn on Power Button to begin cleaning.

5Hold Hand Vac to turn off Power Button

6Empty Dust Cup after cleaning and periodically during cleaning when it appears full. (See “Maintenance” section for instructions.)

SUPER FLEXIBLE HOSE: With the right cleaning tool in place and this flexible hose, you can extend your reach into hard-to-clean areas.

2-IN-1 CREVICE/DUSTING TOOL: This tool allows you to reach into narrow cleaning spaces, between cushions, under radiators and baseboards, or hard-to-reach corners; it also allows you to dust a variety of surfaces from furniture and window blinds to lamp shades and book shelves. In addition, the nylon bristles make the tool safe to use on most fabric surfaces.

PET HAIR POWER BRUSH : This unique tool was engineered for fast and easy removal of pet hair and ground-in dirt from carpeted stairs and upholstery.

NOTE: Use hose without tools for large debris cleaning.