Shark NH15W, NH15C Getting Started, Mode 1 Hand Vac with Connections, Technical Specifications

Getting Started

hg

Mode 1: Hand Vac with Connections English

CAUTION: The Power Button for all three modes is on the Hand Vac handle. Always turn the power OFF before plugging and unplugging,

b

c

i

when adding or removing2 attachments, or when connecting

Hand Vac to or from the Backsaver™ Wand.

d

a

e

j

1

3

f

aHand Vacuum

bFlexible Stretch Hose c Backsaver™ Handle d Hose Mount

e Backsaver™ Wand

fShark™ Widebrow Floor Nozzle with Swivel Steering

g2-in-1 Crevice/Dusting Tool h Pet Hair Power Brush

i Air Dam (Hand Vac Mode) j Filters

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz.

Power: 800 Watts

STANDALONE HAND VAC

You can use the standalone Hand Vac for spot-cleaning, and large particle pick-up.

1Slide pointed ends of Air Dam (U-shaped bracket) into tracks on either side of the inlet opening on the bottom of the Dust Cup. Press firmly to ensure that Air Dam is in place.

2When ready to vacuum, make sure all three wheels are resting on the ground. This allows the Air Dam to guide debris to inlet opening.

3While holding Hand Vac, press Power Button to begin cleaning. Hold Hand Vac to turn off the Power Button.

5Empty Dust Cup after cleaning and periodically during cleaning when it appears full. (See “Maintenance” section for instructions.)

2 TOLL FREE: 1-800-798-7398

www.sharkclean.com 3