Multiquip ST6125G, ST4125G operation manual Safety Information, Safety Messages, Symbol

Page 4

SAFETY INFORMATION

Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment.

Failure to read and understand the safety messages and operating instructions could

result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you about potential hazards that could injure you or others.The safety messages specifically address the level of exposure to the operator and are preceded by one of four words: DANGER, WARNING, CAUTION or NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.

Symbol

Safety Hazard

Burn hazards

Electric shock hazards

Rotating parts hazards

Pressurized fluid hazards

PAGE 4 — ST4125G/ST6125G SUBMERSIBLE PUMP • OPERATION MANUAL — REV. #0 (11/18/10)

Image 4
Contents Model ST4125G/ST6125G This Manual Must Accompany the Equipment AT ALL TimesTable of Contents ST4125G/ST6125G Submersible PumpPage Safety Messages Safety InformationSymbol fire extinguisher General Safetyfirst aid kit Electrical Safety Pump Safety Never disconnect any emergency or Power Cord/Cable Safety Grounding SafetyControl Box Safety Lifting SafetySpecifications ST4125G/ST6125G Submersible Pump SpecificationsModel ST4125G/ST6125G Submersible Pump Dimensions ST4125G/ST6125G Pump DimensionsST4125G/ST6125G General Information ST4125G/ST6125G Components Submersible Pump ComponentsFloat Switches Mechanical Float SwitchDesign Features How It WorksFloat Switches Mounting The Float SwitchesCB12/CB14 Control Boxes Control Box SpecificationsControl Box Used With Heater Thermal FloatControl BOX Installation Control Box InstallationPhase Power Installation Input Power Cord RequirementsDual Float switch Connections Connecting SW-1WOPA Float Switches to Control BoxFloat Terminal Wire 230/460 VAC Voltage Selection 230/460 VAC Voltage SelectionCB12/CB14 Control BOX Power Connections Phase Power Installation Output To Pump230/460 VAC Input Power Connections 230/460 VAC Output Power ConnectionsCB12/CB14 Control BOX Wiring Layout See TablePump Placement OperationReset Button Control Box Operation Auto ModeShut-Down Maintenance LubricationLong Term Storage Impeller RemovalWater Tank Storage Electrical Insulation Testing Why perform electrical insulation testing?Troubleshooting Pump TroubleshootingCB12/CB14 Control BOX Wiring Diagram ConnectionsPage HERE’S HOW to GET Help

ST6125G, ST4125G specifications

The Multiquip ST4125G and ST6125G are versatile and robust generators that cater to a variety of demanding applications in the construction, rental, and industrial sectors. These portable generators are designed to deliver reliable power with user-friendly features that make them ideal for both professional and recreational use.

One of the standout features of the ST4125G and ST6125G models is their impressive power output. The ST4125G is capable of providing up to 4,000 watts of continuous power, while the ST6125G offers a higher capacity of 6,000 watts. This flexibility allows users to choose the model that best suits their needs, whether for powering tools on a job site or serving as backup power during an outage.

Both models are equipped with a rugged 4-stroke gasoline engine that ensures efficient performance and longevity. The engines are designed with thermal protection to prevent overheating, allowing for extended run times without interruption. Additionally, Multiquip has engineered these generators to have low noise levels while operating, making them suitable for use in residential areas and noise-sensitive environments.

The ST4125G and ST6125G come with a variety of outlets to accommodate different power needs, including 120V and 240V outlets. This versatility makes them ideal for powering everything from small hand tools to larger machinery. Furthermore, the generators feature a dual circuit breaker system for added safety, ensuring a reliable and secure power source.

Portability is another major advantage of the Multiquip ST4125G and ST6125G. Both models are designed with a steel frame and feature large wheels and a folding handle, making transport to and from job sites effortless. The compact design also allows for easy storage when not in use.

In terms of maintenance, Multiquip has incorporated user-friendly features that simplify routine checks and servicing. The generators feature easy access to critical components, allowing users to perform maintenance tasks efficiently.

With their combination of power, portability, and user-friendly features, the Multiquip ST4125G and ST6125G generators stand out in the competitive landscape of portable power solutions. Whether for construction projects, outdoor events, or emergency backup, these generators are reliable choices that meet the demands of various users.