Multiquip ST41230 Power Cord/Cable safety, Grounding safety, Control box safety, LiFting saFetY

Page 7

Safety Information

NOTICE

„alWaYs make certain that the voltage supplied to the pump is correct. Always read the pump’s nameplate to determine what the power requirements are.

power Cord/Cable safety

Dan

„never stand in water while AC power cord is connected to a live power source.

„never use damaged or worn cables or cords. Inspect for cuts in the insulation.

„ never grab or touch a live power cord or cable with wet hands. The possibility exists of electrical shock, electrocution or death.

„Make sure power cables are securely connected to the motor's output receptacles. Incorrect connections may cause electrical shock and damage to the motor.

Warning

„never attempt to use the power cord as a lifting or lowering device for the pump.

NOTICE

„alWaYs make certain that proper power or extension cord has been selected for the job. See Cable Selection Chart in this manual.

grounding safety

Danger

„alWaYs make sure pump is grounded.

„never use gas piping as an electrical ground.

„alWaYs make sure that electrical circuits are properly grounded to a suitable earth ground (ground rod) per the National Electrical Code (NEC) and local codes before operating generator. severe injury or death by electrocution can result from operating an ungrounded motor.

Control box safety

Danger

„alWaYs have a qualifi ed electrician perform the control box installation. The possibility exists of electrical shock or electrocution.

NOTICE

„alWaYs mount control box in a vertical position protected from harsh environmental elements.

liFting saFetY

Caution

„When raising or lowering of the pump is required, always attach an adequate rope or lifting device to the correct lifting point (handle) on the pump.

NOTICE

„Do not lift machine to unnecessary heights.

„never lift the equipment while the electric motor is running.

transporting saFetY

NOTICE

„alWaYs shut down pump before transporting.

„alWaYs tie down equipment during transport by securing the equipment with rope.

environmental saFetY/DeCommissioningCE

„Do not pour waste or oil directly onto the ground, down a drain or into any water source.

„Contact your country's Department of Public

Works or recycling agency in your area and arrange for proper disposal of any electrical components, waste or oil associated with this equipment.

„When the life cycle of this equipment is over it is recommended that the pump casing and all other metal parts be sent to a recycling center

Metal recycling involves the collection of metal from discarded products and its transformation into raw materials to use in manufacturing a new product.

Recyclers and manufacturers alike promote the process of recycling metal. Using a metal recycling center promotes energy cost savings.

st4/ST6 series submersible pumps• operation AND PARTS manual — rev. #1 (11/12/13) — page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model st41230/st41460 Model st61230/st61460 ST41230/ST41460 ST61230/ST61460 Submersible Pumps Table of ContentsChoose from three easy options Symbol Safety InformationSaFetY messages SaFetY sYmbolsGeneral saFetY EleCtriCal saFetY Pump saFetY„ never disconnect any emergency or LiFting saFetY Power Cord/Cable safetyGrounding safety Control box safetySpecifications SpecificationsPump Dimensions DimensionsGeneral information Submersible Pump Components ComponentsHow It Works Float switchesMechanical Float Switch Design FeaturesMounting The Float Switches Float SwitchesHeater Control Box SpecificationsControl Boxes Used WithPower Cord Requirements Control box installationControl Box Installation Phase Power Installation InputDual Float switch Connections Connecting SW-1WOPA Float Switches to Control BoxFloat Terminal Wire 230/460 VAC Output Power Connections Control Box power connectionsPhase Power Installation Output To Pump 230/460 VAC Input Power Connections1L1 5L3 Control box wiring layoutOperation Pump PlacementControl Box Operation Auto Mode Reset ButtonShut-Down Lubrication MaintenanceImpeller Removal Mechanival Seal ReplacementWater Tank Storage Electrical Insulation TestingLong Term Storage Page Pump Troubleshooting TroubleshootingThree Phase Wiring Connections Control box wiring diagram CB1269/CB1274Control box wiring diagram CB1456/CB1463 Remarks Column No. ColumnPart no. Column QtY. ColumnQty Description Suggested Spare PartsST41230/ST41460 Assy Part Name QTY ST41230/ST41460 Assy Part Name QTY Remarks ST61230/ST61460 Assy SCREW, HEX. M6 ST61230/ST61460 Assy WASHER, Lock M8 FreigHt poliCY Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help

ST61230, ST61460, ST41230, ST41460 specifications

The Multiquip ST41460, ST41230, ST61460, and ST61230 are a series of portable generators designed to meet the power needs of various applications, from construction sites to outdoor events. These generators combine robust performance with user-friendly features, enabling operators to rely on them for consistent power delivery.

Starting with the ST41460, this generator provides a maximum output of 4,600 watts, making it an ideal choice for users requiring significant power. It is equipped with a powerful Honda engine known for its fuel efficiency and durability. The dual fuel capability allows the ST41460 to run on either gasoline or propane, providing flexibility in fuel choice depending on availability or preference. Additionally, the unit features a compact design, making it easy to transport and store.

The ST41230 is optimized for those who need a lighter and more portable option without sacrificing performance. With a maximum output of 3,000 watts, it is perfect for powering tools, lights, and small appliances. This generator also offers a quiet operation, making it suitable for residential areas or events where noise reduction is a priority. The ST41230 further includes a digital panel that displays fuel level and run time, enhancing usability and monitoring.

Moving to the ST61460, this model takes power output up a notch with 6,000 watts peak capacity. Its heavy-duty construction ensures reliability on job sites, while the full-length skid base offers added stability and protection. This unit is also equipped with advanced inverter technology, providing clean and stable power perfect for sensitive electronics.

Lastly, the ST61230 features a balance of power and portability, with a maximum output of 3,000 watts that caters well to users in need of moderate power for tools and recreational use. The incorporation of safety features such as low-oil shutdown and circuit breaker ensures that the generator operates safely and reduces the risk of damage to connected devices.

Each of these Multiquip generators boasts user-friendly features, including easy-start systems, multiple outlet options, and rugged wheels for enhanced mobility. With their reliable performance, advanced technologies, and robust construction, the ST41460, ST41230, ST61460, and ST61230 models are ideal solutions for anyone seeking dependable power in various settings. Whether for construction, home use, or recreational activities, these generators provide reliable support for all power needs.
Top Page Image Contents