Graco 03761B dimensions Pump Service, Disconnecting the Air Motor, Reconnecting the Air Motor

Page 11

Pump Service

Disconnecting the Air Motor

WARNING

To reduce the risk of serious injury whenever you

 

115

 

 

are instructed to relieve pressure, always follow the

103

Pressure Relief Procedure on page 8.

 

 

 

 

 

3

1.

Flush the pump.

 

 

 

2.

Relieve the pressure. Remove the pump from its

 

 

 

mounting.

 

 

3.

See Fig. 6. Unscrew the tie rod locknuts (103).

 

 

4.

Unscrew and remove the screw (105) and barrel

105

 

(104).

 

 

5.

Raise the air motor (115) away from the displace-

 

 

 

ment pump (114). Unscrew the displacement rod

 

 

 

(15) from the air motor connecting rod (S).

 

 

6.

To order pump parts, refer to the parts lists on

 

 

 

pages 12–16. Refer to pages 17–34 for displace-

 

 

ment pump service and parts information. Refer to

106

manual 307456 for air motor service and parts in-

2

formation.

 

Reconnecting the Air Motor

1.When reconnecting the air motor, use lithium base grease on the threads of the displacement rod

(15). Make sure the o-ring (14) is in place on the rod.

2.Insert the muffler (T) into the air motor connecting rod (S) as shown in Fig. 6.

3.Tighten the displacement rod (15) into the air mo- tor connecting rod hand tight, and install the barrel and screw set (104 and 105).

4.Apply thread sealant to the threads of the tie rods (106). To ensure proper alignment, first thread the tie rod locknuts (106) loosely onto the tie rods, then torque evenly to 15 NSm (8 ft–lb).

NOTE: Removing the muffler (T) will increase both

Fig. 6

pump flow rate and exhaust noise.

 

5.Reconnect the groundwire if it was disconnected during service.

S

104

T

14

15 1

114

1Grease the threads.

2Apply thread sealant. Torque evenly to

315 NSm (8 ft–lb).

03766B

307427 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Table of Contents Instructions-Parts List307427 SymbolsFire and Explosion Hazard This model is Pump ModelsStubby Pumps Bung-Mounted Drum Length PumpsGrounding the System InstallationGeneral Information Model 226951 only Mounting the PumpModel 226951 Shown System AccessoriesModel 226951 Only All Other ModelsOperation Pressure Relief ProcedureFlush the Pump Before Using Starting and Adjusting the PumpMaintenance Problem Cause Solution TroubleshootingPressure Relief Procedure on Pump ServiceDisconnecting the Air Motor Reconnecting the Air MotorModel 226940 Shown Pump PartsBung Mount Drum-Length Pumps, Carbon Steel Models Description QtyModel 226953 Shown Bung Mount Drum-Length Pumps, Stainless Steel ModelsModel 226943 Shown Stubby Length Pumps Carbon Steel ModelsModel 226943, Series B, leather packed Model 226945 Shown Stubby Length Pumps Stainless Steel ModelsModel 226951, Series B, rubber packed Description Qty Bung Mount Adjustable Length Pump, Carbon Steel ModelPiston Valve Displacement Pump ServiceBefore You Start Intake ValveLiter 55 Gallon Size, Carbon Steel, Leather Packed Displacement Pump PartsModel 215953 Displacement Pump, Series D Model 215956 Displacement Pump, Series CStubby Size, Carbon Steel, Polyethylene Packed Model 215954 Displacement Pump, Series DModel 215957 Displacement Pump, Series C Liter 55 Gallon Size, Carbon Steel, Polyethylene PackedCylinder Model 237254 Displacement Pump, Series aLiter 55 Gallon Size, Carbon Steel, Ptfe Packed Model 237449 Displacement Pump, Series aStubby Size, Carbon Steel, Ptfe Packed Model 237255 Displacement Pump, Series aCarbon Steel Displacement PUMPS, with rubber packings Stubby Size, Carbon Steel, Rubber Packed Model 218113 Displacement Pump, Series aModel 218114 Displacement Pump, Series a Liter 55 Gallon Size, Carbon Steel, Rubber PackedAdjustable Length, Carbon Steel, Rubber Packed Model 218116 Displacement Pump, Series aDisplacement Pump Service Liter 55 Gallon Size, Stainless Steel, Polyethylene Packed Model 215955 Displacement Pump, Series BStubby Size, Stainless Steel, Polyethylene Packed Model 215958 Displacement Pump, Series B307427 Liter 55 Gallon Size, Stainless Steel, Ptfe Packed Model 237253 Displacement Pump, Series aStubby Size, Stainless Steel, Ptfe Packed Model 237256 Displacement Pump, Series aStainless Steel Displacement PUMPS, with rubber packings Liter 55 Gallon Size, Stainless Steel, Rubber Packed Model 220440 Displacement Pump, Series aStubby Size, Stainless Steel, Rubber Packed Model 220439 Displacement Pump, Series aBung Adapters AccessoriesWall Mounting Bracket Carbon Steel. See manual Open Tank Mounting ClampAir LIne Lubricator Ground Wire and ClampBleed-Type Master Air Valve Required Air LIne FilterPump No Overall Length Pump Length Fluid Inlet Fluid Outlet DimensionsCategory Data Technical Data307427 Graco Information Graco Standard Warranty

03761B specifications

The Graco 03761B is a high-performance airless paint sprayer designed to simplify the painting process for both homeowners and professionals. Renowned for its efficiency and ease of use, this sprayer is a go-to tool for delivering a smooth and even finish on a variety of surfaces.

One of the standout features of the Graco 03761B is its powerful motor. It is equipped with a robust electric motor that delivers consistent pressure, enabling the user to apply paint with precision. This feature allows for effective coverage, ensuring that every nook and cranny gets painted without any blotches or inconsistencies. The motor provides a flow rate of up to 0.34 gallons per minute, which translates to faster job completion, ultimately saving both time and effort.

The Graco 03761B utilizes advanced technologies such as the ProXChange Pump, which allows for fast and easy pump replacement on the job site. This innovation minimizes downtime, ensuring the project stays on schedule. Additionally, the airless jet technology allows users to apply coatings without the need for air compressors, reducing the equipment's weight and improving portability.

Another key characteristic of the 03761B is its adjustable pressure settings. Users can easily control the pressure to suit the type of paint and surface being sprayed. This flexibility provides the ability to tackle a wide range of applications, from fine detail work on furniture to large wall or fence projects.

The gun designed for this model is user-friendly, featuring a comfortable grip that reduces fatigue during prolonged use. The model also includes a reversible tip, which allows the user to quickly clear clogs without losing valuable work time.

The Graco 03761B is also designed with durability in mind. Its robust construction ensures that it can withstand the rigors of regular use, making it a reliable companion on job sites or during home improvement projects.

In summary, the Graco 03761B is a powerful, efficient, and versatile airless paint sprayer. With features like a strong motor, ProXChange pump system, adjustable pressure settings, and user-friendly design, it offers exceptional value for anyone looking to achieve a professional-quality finish with ease. Whether for a DIY enthusiast or a painting contractor, the Graco 03761B stands out as a top choice in the airless spray market.
Top Page Image Contents