Multiquip ST2038P, ST204B, ST2037, ST2047 This manual, Foryour Safety and the Safety of Others

Page 5

ST2037, 47, 47B, 38P, 40T SUB. PUMP— SAFETY MESSAGE ALERT SYMBOLS

FORYOUR SAFETY AND THE SAFETY OF OTHERS!

Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others.

This Owner's Manual has been developed to provide complete instructions for the safe and efficient

NOTE operation of the Multiquip Model s

ST2037, ST2047, ST2047B,

ST2038P, and ST2040T Submersible Pumps. Before using these pumps, ensure that the operating individual has read and understands all instructions in

this manual.

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you about potential hazards that could injure you or others. The Safety Messages specifically address the level of exposure to the operator, and are preceded by one of three words: DANGER, WARNING, or CAUTION.

HAZARD SYMBOLS

Rotating Parts

NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury.

Accidental Starting

ALWAYS place the power source circuit breaker or ON/OFF switch in the OFF position, when the pump is not in use.

Sight and Hearing hazard

DANGER

You WILL be KILLED or SERIOUSLY injured if you DO NOT follow directions.

WARNING

You CAN be KILLED or SERIOUSLY injured if you DO NOT follow directions.

CAUTION

You CAN be INJURED if you DO NOT follow directions.

Potential hazards associated with the ST2037, ST2047, ST2047B, ST2038P, and ST2040T submersible pumps operation will be referenced with Hazard Symbols which appear throughout this manual, and will be referenced in conjunction with Safety Message Alert Symbols.

ALWAYS wear approved eye and hearing protection, if required.

Respiratory Hazard

ALWAYS wear approved respiratory protection, if required.

Equipment Damage Messages

Other important messages are provided throughout this manual to help prevent damage to your submersible pump, other property, or the surrounding environment.

This submersible pump, other property, or the surrounding

NOTE environment could be damaged if you do not follow instructions.

ST2037,47, 47B, 38P, 40T SUB. PUMPS — OPERATION AND PARTS MANUAL — REV. #3 (06/15/10) — PAGE 5

Image 5
Contents Models Submersible Pump Component Drawings Order via Fax Dealers Only Best Deal! Order via Internet Dealers OnlyPage This manual Foryour Safety and the Safety of OthersGeneral Safety Emergencies Maintenance SafetyST2037, 47, 47B, 38P, 40T SUB. Pump Dimensions ST2037, 47, 47B, 38P, 40T SUB. Pump Specifications Introduction Control Box Installation WarningsSubmersible Pump Components ST2037, ST2047, ST2047B ST2038P ST2040THow It Works Float Switch TheoryDesign Features Mounting The Float Switch Float SwitchControl Box CB3 CB3 Control Box and Dual Float Switch Application DiagramAttaching Lifting Rope Pump Power Connections Piggy-Back Cord OnlyHose Connections Power Cord Requirements Single-Phase Power Installation InputConnecting Dual float Switch SW-1WOP To Control Box Control Box MountingConnecting AC Power to the Pump Connecting AC Power to the Control BoxGreen PersonnelLubrication DisassemblyOIL Check ImpellerST2037, 47, 47B, 38P, 40T SUB. Pump Maintenance ST2037, 47, 47B, 38P, 40T SUB. Pump -TROUBLESHOOTING ST2037, 47, 47B, 38P, 40T SUB. Pump Performance Curves ST2037, 47, 47B, 38P, 40T SUB. Pump Pumpwiring Diagram Page Explanation of Code in Remarks Column Submersible Pump 1 to 3 Units ST2037, ST2047, ST2047B Electric Submersible Pump Assy Part Name QTY Remark ST2040T Electric Submersible Pump Assy Remark Part NameST2038P- Electric Submersible Pump Assy Impeller Payment Terms Special Expediting ServiceFreight Policy Minimum OrderPage Canada HERE’S HOW to GET Help