ST-2005 Series SUB. Pump Operation, Hose Connections

ST-2005 SERIES SUB. PUMP — OPERATION

Hose Connections

1.Connect a 2-inch hose to the discharge port on the pump as shown in Figure 8. Make sure that the hose is attached correctly to the discharge port.

Pump Power Connections (Piggy-Back Cord Only)

1.Make sure the circuit breaker supplying power to the pump is in the OFF position.

2.Connect the float switch or switches to the AC power receptacle as shown in Figure 6.

Attaching Lifting Rope

1.Attach a suitable lifting cable (rope) to the carrying handle (Figure 8) on the pump and lower the pump into place. For applicationswherethereisanexcessiveamountofmud,grit or silt, the use of a support platform is desirable. When pumpingwaterfromswimmingpooltypeapplicationswhere thereislittleornodebris,thesupportplatformisnotrequired

Figure 9. Submersible Pump Upright Position

(Incorrect)

3.If all of the pump's electrical requirements have been met, placethecircuitbreakerorpowerON/OFFswitchintheON position.

4.Wait a few seconds and water should begin to flow from the discharge hose.

5.If water is not flowing from the discharge hose or not flowing freely after a few minutes, remove the power from the pump and check the system for leaks.

6.To stop the pump from pumping, place the circuit breaker or ON/OFF switch in the OFF position.

DANGER

NEVER! grab or touch a live power cord (Figure 10). DO NOT stand in water when connecting the pump's power cord into a voltage source.The possibility exist of electrical shock, electrocution and possibly death!

WET

HANDS

Figure 8. Submersible Pump Upright Position

(Correct)

2.Make sure the pump is always placed in an upright position, nottilted(Figure9).Neverpositionthepumpdirectlyonasoft, loose bottom. Remember to attain maximum pumping ca- pacity and prevent excessive wear, position the pump so it will not burrow itself into sand or clay.

POWER

CORD

(POWER ON)

Figure 10. Power Cord (Wet Hands)

ST-2005 SERIES SUBMERSIBLE PUMPS — OPERATION & PARTS MANUAL — REV. #3 (09/21/04) — PAGE 15

ST-2005 specifications

The Multiquip ST-2005 is a compact yet powerful generator that stands out in the market for its reliability and efficiency, making it a popular choice for construction sites, outdoor events, and emergency power needs. Engineered to deliver dependable electricity, it is equipped with advanced features and technologies that cater to both professional and personal use.

One of the standout features of the ST-2005 is its robust 4-stroke engine, which provides an impressive output of 2000 watts. This engine is designed with fuel efficiency in mind, allowing users to run their electrical tools and devices for extended periods without frequent refueling. The generator’s fuel tank has a capacity of 1.8 gallons, providing an operating time of up to 10 hours on a quarter load, a significant advantage for users requiring consistent power throughout the day.

Portability is another key characteristic of the Multiquip ST-2005. Weighing in at just around 50 pounds, this generator features a compact design that includes a sturdy frame and integrated wheels, allowing for easy transportation to various job sites or events. The foldable handle adds to its portability, making it convenient to store when not in use.

The ST-2005 incorporates state-of-the-art technologies that enhance its performance and usability. This includes an integrated inverter system that ensures clean and stable power output, making it suitable for sensitive electronic devices such as laptops and smartphones. Along with this, the generator features a low oil shutdown mechanism, which automatically turns off the engine if the oil level drops below a safe threshold, thereby protecting the engine from damage.

User-friendly control panels are another hallmark of the Multiquip ST-2005. The generator comes equipped with multiple output outlets, including 120V and 12V options, allowing users to connect a variety of devices simultaneously. Additionally, an easy-to-read watt meter provides real-time information on power usage, ensuring that users can efficiently manage their energy consumption.

In conclusion, the Multiquip ST-2005 is designed for durability, performance, and ease of use. With its powerful engine, portability, advanced inverter technology, and user-friendly features, it serves as an invaluable tool for anyone needing reliable power on the go, making it a worthy investment for both professionals and home users alike.