White W338 instruction manual Changing the Needle

ChangingtheNeedle

1.Turn the handwheel (K) clockwise to raise the needle

(R)to its highest position.

2.Loosen the needle clamp screw

(O)by turning it

counter-clockwise (toward you). You may need to use a short

slotted screwdriver or small pliers.

3.Remove the needle (R) pulling down, away from the needle clamp(P).

4.Place the new needle with the flat side facing in against the needle clamp(P).

5.Push it gently as far up as it will go, and against the needle clamp(P).

6.Tighten the needle clamp screw

(O)while holding the needle

(R)in place.

Note: Size 90/14 sewing machine needles are recommended.

10