Smart Parts 100 s owner manual Important Safety Instructions

Page 2

This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the following:

Read all instructions before using this household sewing machine.

DANGER - To reduce the risk of electric shock:

•A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning.

•Always unplug before relamping. Replace bulb with same type rated 10W (110-120V), 15W (220-240V).

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:

•Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children or infirm person.

•Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual.

•Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

•Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the Sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth.

•Keep fingers away from all moving parts. Special care is required around the Sewing machine needle.

•Always use the proper needle plate. The wrong plate can cause the needle to break.

•Do not use bent needles.

•Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

•Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc.

•Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.

•Never drop or insert any object into any opening.

•Do not use outdoors.

•Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.

•To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

SAVE THESE INSTRUCTIONS

Page 1 Page 3
Image 2
Page 1 Page 3
Contents 100 s Important Safety Instructions Congratulations Page List of contents Principal parts of the machine Principal parts of the machine Accessories Extension table Accessory tray Sewing light Connecting machine to power sourceFoot control For USA and CanadaChanging the light bulb Adjusting presser foot pressure Presser foot lifterRemoving the presser foot Attaching the presser foot holder/presser foot/seam guideAttaching the presser foot Attaching the seam guideWinding the bobbin Please NoteInserting the bobbin Inserting and changing needle Threading the upper thread Thread tension Upper thread tensionRaising the bobbin thread Removing your work Reverse sewingChanging sewing directions Cutting the threadMatching needle/ fabric/ thread NEEDLE, FABRIC, Thread Selection GuideHow to choose your stitch Straight stitching Function of stitch length dial while zigzagging Zigzag stitchingFunction of stitch width dial Standard overlock Overcasting stitchesStretch overlock Tips ButtonholesPrepare Zippers and piping Joining fabric Step zigzag stitchSewing elastic Stretch triple zigzag stitch Straight stretch stitch and Stretch triple zigzag stitchStraight stretch stitch Free-motion darning Darning Free-motion monogramming and embroidering Preparation for Monogramming and EmbroideringQuilting Twin needle Optional Bobbin holder MaintenanceCleaning Hook race and feed dogTroubleshooting guide Problem Cause CorrectionPage

100 s specifications

The Smart Parts 100S is a revolutionary paintball marker that has gained considerable attention in the paintball community for its innovative design and cutting-edge features. This marker is particularly aimed at competitive players who demand reliability, performance, and precision on the field.

One of the standout features of the Smart Parts 100S is its lightweight design. Weighing in at just under two pounds, this marker allows for greater mobility and agility, essential for fast-paced paintball matches. The minimalistic build doesn't compromise on durability; the body is crafted from high-quality aluminum, providing both strength and sturdiness while keeping the weight manageable.

Equipped with an electronic trigger system, the Smart Parts 100S offers players an adjustable rate of fire, allowing for a customizable shooting experience. The response is crisp and quick, which can be critical during high-pressure gameplay. Beyond the electronic trigger, the marker incorporates a user-friendly interface that allows players to easily switch between different firing modes, including semi-automatic, burst, and fully automatic settings.

In terms of technology, the 100S utilizes a spool valve system that delivers a smoother shot with reduced recoil. This advanced mechanism significantly enhances accuracy and consistency, letting players maintain tighter groupings when firing. The built-in adjustable regulator further improves performance by ensuring stable velocity, irrespective of changing atmospheric conditions.

The marker comes with a high-capacity, low-profile loader that minimizes the likelihood of jams and ensures that players can maximize their firing potential without frequent interruptions. Additionally, it features a micro-branch air input that increases air efficiency, allowing players to get more shots per tank fill.

Another notable characteristic of the Smart Parts 100S is its compatibility with a wide range of accessories, including various barrels and grips. This adaptability permits players to customize their setup to suit their playstyle, making it a versatile choice for both novices and seasoned veterans.

In conclusion, the Smart Parts 100S stands out as a top-tier paintball marker, blending lightweight design, advanced electronic features, and superior accuracy. For players looking to enhance their game, the 100S offers an impressive package that is hard to ignore.
Top Page Image Contents