Smart Parts 100 s owner manual Troubleshooting guide, Problem Cause Correction

Page 37

Troubleshooting guide

Problem

Cause

Correction

Upper thread breaks

1.The machine is not threaded correctly.

1.Rethread the machine.

 

2.The thread tension is too tight.

2.Reduce the thread tension. (lower number)

 

3.The thread is too thick for the needle.

3.Select a larger needle.

 

4.The needle is not inserted correctly.

4.Remove and reinsert the needle. (flat side towards the back)

 

5.The thread is wound around the spool holder pin.

5.Remove the spool and thread from the spool holder pin.

 

6.The needle is damaged.

6.Replace the needle.

 

 

 

Lower thread breaks

1.The bobbin case is not inserted correctly.

1.Remove and reinsert the bobbin case and pull on the thread. The thread

 

2.The bobbin case is threaded wrong.

should pull easily.

 

3.The lower thread tension is too tight.

2.Check both bobbin and bobbin case.

 

 

3.Loosen lower thread tension as described.

 

 

 

Skipped stitches

1.The needle is not inserted correctly.

1.Remove and reinsert needle. (flat side towards the back)

 

2.The needle is damaged.

2.Insert a new needle.

 

3.The wrong size needle has been used.

3.Choose a needle to suit the thread and fabric.

 

4.The foot is not attached correctly.

4.Check and attach correctly.

 

 

 

Needle breaks

1.The needle is damaged.

1.Insert a new needle.

 

2.The needle is not correctly inserted.

2.Insert the needle correctly. (flat side towards the back)

 

3.Wrong needle size for the fabric.

3.Choose a needle to suit the thread and fabric.

 

4.The wrong foot is attached.

4.Select the correct foot.

 

 

 

Loose stitches

1.The machine is not correctly threaded.

1.Check the threading.

 

2.The bobbin case is not correctly threaded.

2.Thread the bobbin case as illustrated.

 

3.Needle/ fabric/ thread combination is wrong.

3.The needle size must suit the fabric and thread.

 

4.Thread tension wrong.

4.Correct the thread tension.

 

 

 

Seams gather or

1.The needle is too thick for the fabric.

1.Select a finer needle.

pucker

2.The stitch length is wrong adjusted.

2.Readjust the stitch length.

 

3.The thread tension is too tight.

3.Loosen the thread tension.

 

 

 

Uneven stitches,

1.Poor quality thread.

1.Select a better quality thread.

uneven feed

2.The bobbin case is wrong threaded.

2.Remove bobbin case, thread and insert correctly.

 

3.Fabric has been pulled.

3.Do not pull on the fabric while sewing, let it be taken up by the machine.

 

 

 

The machine is noisy

1.Fluff or oil have collected on the hook or needle bar.

1.Clean the hook and feed dog as described.

 

2.The needle is damaged.

2.Replace the needle

 

 

 

The machine jams

Thread is caught in the hook.

Remove the upper thread and bobbin case, turn the handwheel

 

 

backwards and forwards by hand and remove the thread remands.

 

 

 

33

Page 36 Page 38
Image 37
Page 36 Page 38
Contents 100 s Important Safety Instructions Congratulations Page List of contents Principal parts of the machine Principal parts of the machine Accessories Extension table Accessory tray Foot control Connecting machine to power sourceSewing light For USA and CanadaChanging the light bulb Presser foot lifter Adjusting presser foot pressureAttaching the presser foot Attaching the presser foot holder/presser foot/seam guideRemoving the presser foot Attaching the seam guidePlease Note Winding the bobbinInserting the bobbin Inserting and changing needle Threading the upper thread Upper thread tension Thread tensionRaising the bobbin thread Changing sewing directions Reverse sewingRemoving your work Cutting the threadNEEDLE, FABRIC, Thread Selection Guide Matching needle/ fabric/ threadHow to choose your stitch Straight stitching Function of stitch width dial Zigzag stitchingFunction of stitch length dial while zigzagging Stretch overlock Overcasting stitchesStandard overlock Prepare ButtonholesTips Zippers and piping Sewing elastic Step zigzag stitchJoining fabric Straight stretch stitch Straight stretch stitch and Stretch triple zigzag stitchStretch triple zigzag stitch Free-motion darning Darning Preparation for Monogramming and Embroidering Free-motion monogramming and embroideringQuilting Twin needle Optional Cleaning MaintenanceBobbin holder Hook race and feed dogProblem Cause Correction Troubleshooting guidePage

100 s specifications

The Smart Parts 100S is a revolutionary paintball marker that has gained considerable attention in the paintball community for its innovative design and cutting-edge features. This marker is particularly aimed at competitive players who demand reliability, performance, and precision on the field.

One of the standout features of the Smart Parts 100S is its lightweight design. Weighing in at just under two pounds, this marker allows for greater mobility and agility, essential for fast-paced paintball matches. The minimalistic build doesn't compromise on durability; the body is crafted from high-quality aluminum, providing both strength and sturdiness while keeping the weight manageable.

Equipped with an electronic trigger system, the Smart Parts 100S offers players an adjustable rate of fire, allowing for a customizable shooting experience. The response is crisp and quick, which can be critical during high-pressure gameplay. Beyond the electronic trigger, the marker incorporates a user-friendly interface that allows players to easily switch between different firing modes, including semi-automatic, burst, and fully automatic settings.

In terms of technology, the 100S utilizes a spool valve system that delivers a smoother shot with reduced recoil. This advanced mechanism significantly enhances accuracy and consistency, letting players maintain tighter groupings when firing. The built-in adjustable regulator further improves performance by ensuring stable velocity, irrespective of changing atmospheric conditions.

The marker comes with a high-capacity, low-profile loader that minimizes the likelihood of jams and ensures that players can maximize their firing potential without frequent interruptions. Additionally, it features a micro-branch air input that increases air efficiency, allowing players to get more shots per tank fill.

Another notable characteristic of the Smart Parts 100S is its compatibility with a wide range of accessories, including various barrels and grips. This adaptability permits players to customize their setup to suit their playstyle, making it a versatile choice for both novices and seasoned veterans.

In conclusion, the Smart Parts 100S stands out as a top-tier paintball marker, blending lightweight design, advanced electronic features, and superior accuracy. For players looking to enhance their game, the 100S offers an impressive package that is hard to ignore.
Top Page Image Contents