Olympus P-S100 Troubleshooting, EN-34, Additional information, Problem, Cause / status, Solution

Doya_E.book Page 34 Thursday, November 11, 2004 10:50 AM

Troubleshooting

Additional information

Troubleshooting

Before asking for repairs, check the printer using the following checklist. If the problem still occurs, contact an

authorized Olympus service center.

Problem	Cause / status	Solution	Page(s)
The power does not	The AC adapter is not connected.	Connect the AC adapter.	18
turn on.
The ribbon	The power turns off during printing.	Push the ribbon cartridge until it
cartridge cannot be		clicks. Turn on the printer again,	–
removed.		and wait until the operation
		sound stops.
Printing a picture	The printer takes a long time to open	The loading time varies	–
from a digital	a TIFF file.	depending on the image size.
			–
camera does not		Wait until loading is complete.
start soon.
	The size of a JPEG file is large.		–
Printing does not	The paper-in tray or ribbon cartridge	Use a ribbon cartridge and
start.	is not suitable for the paper size you	paper-in tray of the same size.
	are using.		21, 38
	The print size set on a digital camera	Insert the same size paper and
	or PC is different from the loaded	ribbon cartridge as selected on
	Paper-in Tray/Ribbon Cartridge.	the digital camera or PC.
	No ribbon cartridge is set in the	Set a ribbon cartridge.	19
	printer.
	No paper in the paper-in tray.	Replace the paper-in tray.	22
	Paper is jammed in the paper ejection	Remove the jammed paper.	36
	area.
	The printer driver is not correctly	Install or re-install the printer	27
	installed on the PC.	driver on the PC correctly.
	Indicators lights or blinks.	–	33

EN-34