Olympus P-S100 user manual EN-11

Doya_E.book Page 11 Thursday, November 11, 2004 10:50 AM

Safety regulations

WARNING

Do not use the printer with an AC adapter or power cord other than that specified/provided

Do not use the provided AC adapter or power cord with any other devices

Provide correct voltage

Incorrect voltage may damage printer parts.

Use with incorrect voltage may cause fire or electric shock.

Connect the power cord correctly/safely

If the power cord is plugged in loosely, it may cause a fire or electric shock.

Push the plug all the way into the outlet.

Make sure that excessive dust and debris do not accumulate on the power cord

Dust and debris may conduct electricity, which can cause fire and electric shock.

If excessive dust and debris accumulate on the cord, unplug the cord and clean it.

Always unplug the power cord during an electrical storm

The induced electricity from storms may cause fire, electric shock, or printer

malfunction.

Do not hold the power plug with wet hands

Doing so may result in fire, electric shock, or printer malfunction.

Be sure your hands are dry before handling.

Plug the printer directly into an outlet

Avoid overloading outlets with use of extensions and adapters, etc.

Do not move the printer when the power cord is taut

Moving the printer when the power cord is taut may damage the cord.

Using the printer when damaged may cause fire or electric shock.

When moving the printer, unplug and bundle the power cord.

Read this first

EN-11