Olympus P-S100 EN-9, If this device acts abnormally, unplug it, Do not damage the power cord

Doya_E.book Page 9 Thursday, November 11, 2004 10:50 AM

Safety regulations

WARNING

If this device acts abnormally, unplug it

Do not use the printer if it emits smoke, unusual smells, strange sounds, or becomes unusually warm.

Use under these conditions may cause fire or electric shock.

Turn off and unplug the printer. Then contact an authorized Olympus service center.

Should any liquid or foreign objects get into the printer, unplug the power cord

Do not allow any liquids, metals, or flammable objects to get into the printer.

This may cause fire or electric shock.

Turn off and unplug the printer. Then contact an authorized Olympus service center.

If the printer cabinet is damaged, unplug the power cord

Do not use this device if the cabinet (body) is damaged.

Use in this condition may cause fire or electric shock.

Turn off and unplug the printer. Then contact an authorized Olympus service center.

If the power cord is damaged, unplug it

Do not use a damaged power cord.

Use in this condition may cause fire or electric shock.

Turn the printer off, and unplug the power cord being careful not to touch any exposed wires. Then contact an authorized Olympus service center.

Do not damage the power cord

Do not damage or modify the power cord.

A damaged power cord may result in fire or electric shock. To prevent damage, do not bend the cord excessively or pull on the cord when unplugging. Take care no heavy objects are placed on or roll over the cord.

If the power cord is damaged, contact an authorized Olympus service center.

Read this first

EN-9