Olympus P-S100 EN-12, Ensure there is adequate ventilation around the printer, Read this first

Doya_E.book Page 12 Thursday, November 11, 2004 10:50 AM

Safety regulations

Read this first

CAUTION

Ensure there is adequate ventilation around the printer

Do not put the printer where there is poor ventilation, or on a soft surface such as a rug or bed.

Do not put the printer on an unstable surface

Do not put the printer on an unstable surface such as a shaky table. Injury may result from the printer being dropped or falling. This could also damage the printer or cause the printer to malfunction.

Do not touch the non-user-serviceable parts inside the printer

Doing so may cause injury or burns. This applies especially to children and those

unfamiliar with the printer.

Do not unplug the printer by jerking or pulling on the power cord

To unplug the power cord, hold it by the plug. Pulling on the cord may damage it,

possibly resulting in fire or electric shock.

Unplug the printer for servicing

Always unplug the printer before servicing or performing maintenance.

Unplug the printer if it will not be used for an extended period of time

Unplug the printer if it will not be used for an extended period of time, such as while

you are away on a long trip.

Otherwise, deteriorated insulation or current leakage may cause fire or electric shock.

EN-12