Olympus P-S100 user manual EN-10, Do not disassemble or modify the printer, Read this first

Doya_E.book Page 10 Thursday, November 11, 2004 10:50 AM

Safety regulations

Read this first

WARNING

Do not disassemble or modify the printer

The printer has both hot and high voltage parts on the inside. Touching these parts may result in burns, electric shock, and/or damage to the printer. Never attempt to disassemble or modify the printer as this may lead to electric shock or printer malfunction.

For service or repair, contact an authorized Olympus service center.

Do not allow liquids near the printer

If liquid gets into the printer, it may result in fire or electric shock.

Do not place heavy objects on the printer

Heavy objects may damage the printer cabinet, resulting in fire or electric shock. Damage may also result from the printer being dropped or falling.

Do not install the printer in the following places

To prevent fire, electric shock, and printer malfunction, do not install the printer in the following places:

•Dusty, humid, or oily places

Should any dust or liquid get into the printer, it may result in fire or electric shock.

•Extremely hot places

Do not expose the printer to direct sunlight, such as inside a car or near a window or extremely high temperatures, such as near a heater. Doing so may damage the printer cabinet, resulting in fire or electric shock.

Use the printer in an environment with an ambient temperature between 10 to 35°C (50 to 95°F) and humidity of 30 to 80%.

Do not use the printer in the following places

•Unstable or inclined surfaces.

•Outdoors (particularly on beaches, etc.), or places that expose the printer to excessive dust or debris.

•Places subject to rain, dripping, or enclosed places where condensation could occur such as inside a plastic bag.

EN-10