Sears 385. 1274180, 385. 1254180, 385. 1264180 owner manual = Clean the Shuttle Race

=Clean the Shuttle Race

This area must be kept free of dust, lint and occasional tangied thread, Ctean the shuttle race area about every three months,

Center	pm	of
the shuttle			Shut[la	dr_ver
					Lever
					Shu[tie
			Lever_
			Shuttle Race
v r
					Shuttle Race
		case	(Oil	._re)	Cover

J

To Ctean the Shuttle Area:

1.Raise the needle bar to its h_ghest point and remove the bobbin case.

2.Push shuttle race levers aside. Lift shuttle race cover and take shuttle out.

3.Clean the shuttle race with a lint brush,

4.Put a drop of sewing machine oii on

the center pin of the shuttle. Do not over-oil.

To Replace Shuttle Assembly:

1, Position shuttle race as illustrated so that shuttle driver is forming half moon on the left side of the machme,

2.Hold shuttle by center pin and position shuttle so as to form a half moon on the right s_de. Pointed hook will be on the bottom.

3, Place shuttle race cover into place over shuttle assembly.

4.Snap the tevers back rote the original position.

48