Sears 385. 1274180, 385. 1254180, 385. 1264180 Sew in a Zipper, Stop about 2 from the top

Sew in a Zipper (Continued)

J

8. Open the zipper. 10, Close the zipper and turn the

I1, To sew the right side of the zip-

14. Stop about 2" from the top of the

9, Lower the presser foot and stitch the rest of the seam.

INVISIBLE ZIPPER AND CORDING

fabric top side up.

per, set the zipper foot on the right side of the needle.

12.Stitch across and below the bot- tom of the z_pper.

13, Turn the corner and continue to guide the foot along the zipper

z!pper.

15, Lower the needle into the fabric and raise the presser foot,

16, Remove the basting stitches and open the ztpper.

17, Lower the foot and stitch the rest

INVISIBLE ZIPPER

Adiust the toot so the needle _ssewing through the center hole ot the foot and one 8roove of the foot ts riding on the teeth of the zipper as

shown. Follow the zipper manufacturer's inst- ructfons, After zipper has been inserted, f_nish sewing seam by shifting foot to side pos_tlon sewing through side notch,

\	CORDING
	Foot	can also be used	to make	cording for slip*
	covers etc, Cover a cord with 8 strip of b_as
	fabric and sew as shown.
	NOTE'.
	Use "Low Bar Sewing Machine ZIPPER FOOT"
	{6757)	for "qnvlsibe	z_pper'"	and "cording",

which can be obtained at any Sears retait store.

teeth_ as shown,

Stitch through the fabric and zipper tape,

of the seam, Make sure the fold Is even.

42