Harbor Freight Tools 47158 Specific Product Warnings and Precautions, AWG Rating Chart 120 Volt

SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS

1.MAINTAIN A SAFE WORKING ENVIRONMENT. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Micro Mill/Drill Machine in areas near flammable chemicals, dusts, and vapors. Do not use the Micro Mill/Drill Machine in a damp or wet location.

2.GROUND THIS PRODUCT. The electrical Power Cord/Plug (part #128) for this product is equipped with a grounded, 3-prong Plug. Never remove the grounding prong or modify the Plug in any way. Do not use adapter plugs with this product. To comply with the National Electric Code, and to provide additional protection from the risk of electrical shock, this product should only be connected to a 120 Volt, 3-hole electrical outlet that is protected by a Ground Fault Circuit Interrupter (GFCI). (See Assy. Diagram.)

3.IF AN EXTENSION CORD (not provided) IS USED, MAKE SURE TO USE ONLY UL APPROVED CORDS HAVING THE CORRECT GAUGE AND LENGTH. (See Figure A.)

AWG RATING CHART - 120 VOLT

FIGURE A

4.KEEP ALL SAFETY GUARDS IN PLACE, IN PROPER ADJUSTMENT, AND IN PROPER ALIGNMENT.

5.REDUCE THE RISK OF ACCIDENTAL STARTING. Make sure the Forward/Re- verse Switch (part #125) is in the “OFF” position before plugging the Power Cord/ Plug (part #128) into a grounded, 3-hole, 120 Volt, electrical outlet.

(See Figure B, and Assy. Diagram.)

6.PRIOR TO STARTING THE MICRO MILL/DRILL MACHINE, MAKE SURE ALL ADJUSTING KEYS AND WRENCHES ARE REMOVED FROM THE TOOL.

7.DO NOT USE ROTARY PLANERS, WIRE WHEELS, OR ROUTER BITS ON THIS MICRO MILL/DRILL MACHINE.

SKU 47158 For technical questions, please call 1-800-444-3353. Page