Sears 385.16631 owner manual Important Safety Instructions, Watts

Page 5

IMPORTANT SAFETY

INSTRUCTIONS

Your sewing machine is designed and constructed only for HOUSEHOLD use.

Read all instruction before using this sewing machine.

DA N G ER- Toreduce the risk of electric shock:

An appliance should never be left unattended when plugged in. Always

unplug this appliance from the electric outlet immediately after using and before cleaning.

2.

Always

unplug before relamping.

Replace bulb with same type rated

 

 

 

15Watts.

3. Do not reach for the appliance that has fallen into water. Unplug immediately.

4.Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.

WAR N I NG- Toreduce the risk of burns, fire, electric shock,

or injury to persons.

1.Do not allow to be used as a toy, Close attention is necessary when this appliance is used by or near children.

2.Use this appliance only for its intended use as described in this manual.

Use only attachments recommended by the manufacturer as contained in this manual.

3.Never operate this appliance if it has a damaged cord or plug, if it is not

working properly, if it has been dropped or damaged, or dropped into

water. Return the appliance to the nearest authorized dealer or service

center for examination, repair, electrical or mechanical adjustment.

4,

Never operate

the

appliance

with

any

air

opening

blocked.

Keep

 

 

 

 

 

 

 

 

 

 

 

 

ventilation

openings

of the

sewing

machine

and

foot

controller

free from

 

accumulation

of

lint,

dust,

and

loose cloth.

 

 

 

 

5.Never drop or insert any object into any opening.

6.Do not use outdoors.

7.Do not operate where aerosol (spray) products are being used or where oxigen is being administered.

8.To disconnect, turn all controls to the off ("0") position, then remove plug from outlet.

9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10. Keept fingers away from all moving parts. Special care is required around the sewing machine needle and blades.

11, Always use the proper needle plate. The wrong plate can cause the needle to break.

12.Do not use bent needles.

13.Do not pull or push fabric while stitching.

It may deflect the needle causing it to break.

14, Switch the sewing machine off ("0") when making any adjustment in

the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like.

15. ALways unplug the sewing machine from the electrical outlet when

removing covers, lubricating, or when marking any other user servicing

adjustments mentioned in the instruction manual.

SAVE THESE INSTRUCTIONS

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Overlock 3/4D Kenmore Overlock Machine Source Part Description Optional Feet and Attachment Sewing Sewing Machine17822 17824 17828 Watts Important Safety InstructionsContents Screw Plate Know Your Machine Accessory holder Foot Control Use Section .PREPARE Your Machine for SewingIiii !iii How to Turn Hand Wheel =Attaching the Spool Cap and Net Position of Telescoping Thread Guide BarPrepare Your Machine for Sewing Raising or LOwering the Presser Foot Sectuon 2. Prepare Your 4ACHINE for Sewing Threading the MachineThreading the Lower Looper How to Thread Only the Lower LooperLooper ,k.% @ / @ @Threading the Upper Looper Prepare UR Machine JFOR,SEW NGPrepare Your Machne for SEW NG Hine for Sewi NG Prepare Your Machine Forsewing Threading the Needle on the Left Prepare Your Machine FORSEWgNG BdbFinishing to Sew WeightSection Page Securing Ends Thread Tension Dial Correct Tension Learn the StitchesThread Tension 4 threads Thread Tension threadS 71iWrong Tension Serging Using the Needle on LeftThreading the Machine 3 threads Wide/Narrow Stitch Tighten needle thread tension Learn THESTnTCHES111!,i£¸¸ Adjustment of Stitch LengthRemoving the Presser Foot Attaching the Presser Foot Adjustment of Foot PressureOverlock Uses standard Kenmore Knife To Disengage the Upper KnifeLearn Thestntches To Engage the Upper KnifeChanging the Needle Plate Feed Ratio Thread and Needle ChartSectpon 3. Learn the Stitches Edging Narrow Hemming Application Rolled Hemmingi Picot Edging and Narrow HemmingLength NeedleTension Thread FabricHemming Woolly polyesterFor Roiled Hemming and Picot Edging Wrong Tension ¸i!iPicot Edging Section Learn Stitches Thread, Fabric, Range of the Tension and Machine SettingThread MachineLight To Medium Fabric Machine SettingWoven SettingMedium Ii!!il Replacing the Light Bulb For your safetyIii!iiii Replacing the Upper Knife Care for Your MachineWhat to Do When Iii Carrying Handle Changing Needle Needle plate INDEXMemo Iii!ii¸ Specification Specification of the MachineWarranty Overlock

385.16631 specifications

The Sears 385.16631 is a notable model in the world of electronic sewing machines. Designed to meet the needs of both beginners and experienced sewists, this machine combines user-friendly features with advanced technology.

One of the standout characteristics of the Sears 385.16631 is its versatility. With multiple built-in stitch options, it caters to a wide range of sewing projects from basic hemming to intricate quilting. The machine typically offers over 30 different stitches, including essential utility stitches, decorative stitches, and even buttonhole capabilities. This variety allows sewists to express their creativity while ensuring every project can be completed with professional results.

Another core feature of the Sears 385.16631 is its adjustable stitch length and width. This flexibility enables users to customize their stitches according to the fabric type and desired outcome. Whether working with delicate fabrics or thicker materials, the machine can accommodate a diverse range of projects with ease.

The machine is also equipped with an automatic needle threading mechanism, which significantly simplifies the setup process. This time-saving feature helps reduce frustration, especially for novice users still learning the ropes of sewing. In addition, the machine often includes a drop-in bobbin system that is straightforward to use, allowing for more efficient threading and a smooth sewing experience.

Sears has always emphasized durability in its products, and the 385.16631 is no exception. Made with sturdy materials, this sewing machine is designed for longevity, ensuring it can withstand frequent use in various sewing tasks. Furthermore, its compact size makes it easy to store or transport, appealing to those with limited space or who enjoy taking their sewing projects on the go.

Technologically, the Sears 385.16631 features a powerful motor that provides consistent sewing speed and torque, making it capable of handling a variety of fabrics. It also typically includes features such as a free arm for sewing cuffs and collars, as well as a built-in light for better visibility while working on detailed tasks.

In conclusion, the Sears 385.16631 stands out due to its combination of versatility, user-friendly technology, and durability. Whether sewing simple repairs or embarking on more complex creative projects, this machine offers everything a sewist needs to achieve beautiful results. Its reputation for reliability and ease of use continues to make it a popular choice among sewing enthusiasts.
Top Page Image Contents