Harbor Freight Tools 3914 operating instructions Aligning the Pulleys, Bobbin Winder Assembly

Page 9

Hand Wheel Sewing Machine

 

Carriage Bolts (70j),

(7b)

Belt (71j)

Flat Washer (69j),

 

 

Spring Washer (68j),

 

 

Nut (67j)

Set Screws

(8b) (One on

each side of

the Pulley)

Main Shaft

(32b)

Slot in Tabletop for belt

Figure 7 Bobbin Winder Assembly

3.Slide the Sewing Machine Hand Wheel (7b) onto the Main Shaft (32b) of the Sewing Machine. Align one of the Set Screw holes (on the side of the Pulley) with the flat section of the Main Shaft.

Tighten the Set Screws (8b) enough to hold the Pulley in place, but not fully tightened.

Back of Sewing Machine

Slot with Pulley Belt

Carriage Bolts (70j)

flush with Tabletop

Back of Tabletop

Figure 8

4.Using a rubber mallet (sold separately) tap the three Carriage Bolts (70j) into the top of the Tabletop so that they are flush with the tabletop.

REV 04c; 07g, 10b

Figure 9

5.Mount the Motor to the underside of the tabletop using the Carriage Bolts (70j), Flat Washers (69j), Spring Washers (68j), and Nuts (67j). Finger tighten only.

Aligning the Pulleys

Belt (71j)

Motor

 

Set Screw (7j)

 

Pulley (8j)

Figure 10

1.Place the Belt (71j) around the Sewing Machine Hand Wheel (7b), through the slot in the table top, and around the motor Pulley (8j). Make sure the motor pulley is in line with the Sewing Machine Hand Wheel. If you cannot get the Pulleys to line up by sliding them slightly in either direction, you may need to turn the Motor Pulley around. To do this, loosen the Set Screw (7j) on the motor Pulley, slide the Pulley off of the motor

SKU 3914

For technical questions, please call 1-800-444-3353.

Page 9

Image 9
Contents Single needle industrial Sewing Machine For technical questions or replacement parts, please callSafety Warnings Precautions SpecificationsRead all instructions before using this Tool Save This ManualFor technical questions, please call Sewing Safety Precautions Grounding Grounded Tools Tools with Three Prong PlugsExtension Cords Unpacking Table a25’ 50’ 75’ 100’ 150’ Assembly Mounting the Motor Aligning the Pulleys Bobbin Winder AssemblyAdjusting the Belt Tension SKU For technical questions, please call Mounting the Thread StandInstalling the Belt Covers OperationMounting the Bobbin Winder Bobbin Winder Operation Attaching the NeedleModerate to slow speeds for the first 15 minutes of use OFF PositionWith the thread Detail Threading the Top ThreadAdjusting the Needle Thread Tension Adjusting the Stitch LengthAdjusting the Bobbin Thread Tension Raising the Presser FootSetting the Presser Foot Pressure Adjusting the Feed TimingAdjusting Feed Dog Height Adjusting Needle-to-hook Timing Adjusting the Height of the Knee Lifter Adjusting the Presser Bar HeightAdjusting Sewing Speed with Pulleys sold separately MaintenanceMotor Wiring Diagram Part Description Qty ARM BED Parts ListARM BED Assembly Drawing Main Shaft Parts List Main Shaft assembly Drawing Stitch Drive Parts List Stitch Drive Assembly Drawing Presser BAR Parts List Presser BAR Assembly Drawing Feed Control Parts List Feed Control Assembly Drawing Lubrication Parts List Lubrication Assembly Drawing Base Assembly Drawing and Parts List Accessories Parts List and Assembly Drawing Bobbin Winder & Thread Stand Unit Parts List Bobbin Winder & Thread Stand Unit Assembly Drawing Motor Parts List Motor Assembly Drawing Limited 90 DAY Warranty

3914 specifications

Harbor Freight Tools 3914 is a robust and versatile portable generator designed to meet the power needs of both professionals and DIY enthusiasts. Featuring a compact design with a durable frame, this generator is built to withstand tough job site conditions while providing reliable power wherever it is needed.

One of the standout features of the 3914 model is its powerful 212cc engine, which delivers a peak output of 3500 watts and a running output of 3000 watts. This allows users to power multiple devices simultaneously, making it suitable for everything from household appliances during power outages to tools on construction sites. The generator's 4-gallon fuel tank provides an impressive run time of around 11 hours at a 50% load, ensuring that users can rely on it for extended periods without frequent refueling.

In terms of technology, the Harbor Freight Tools 3914 incorporates a user-friendly control panel that includes two 120V AC outlets, a 12V DC outlet, and a circuit breaker for added safety. The 120V outlets are perfect for connecting various tools and devices, while the DC outlet can be used to charge batteries and other electronic devices. The generator also features an easy-to-read fuel gauge, which helps users monitor fuel levels and plan refueling accordingly.

Furthermore, the generator is equipped with a recoil start system, allowing for quick and straightforward operation. Additionally, its lightweight construction, combined with two carrying handles, ensures that it can be transported with ease, making it ideal for camping trips, outdoor events, or emergency use at home.

Safety is also a priority with the 3914 model. It comes with built-in low oil shutdown technology, which automatically turns off the engine when oil levels are low, preventing potential damage and prolonging the life of the generator. The generator's quiet operation is another significant advantage, ensuring that it can be used without causing excessive noise disturbances.

Overall, the Harbor Freight Tools 3914 portable generator stands out for its powerful performance, user-friendly features, and reliable safety mechanisms. Its combination of efficiency and portability makes it a valuable asset for anyone in need of reliable power on the go.