Husqvarna ER10 manual Important Safety Instructions

Page 4

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the following:

Read all instructions before using this household sewing machine.

DANGER - To reduce the risk of electric shock:

•A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning.

•Always unplug before relamping. Replace bulb with same type rated 15 Watt.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:

•Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children and infirm persons.

•Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual.

•Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

•Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth.

•Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

•Always use the proper needle plate. The wrong plate can cause the needle to break.

•Do not use bent needles.

•Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

•Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc.

•Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.

•Never drop or insert any object into any opening.

•Do not use outdoors.

•Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.

•To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•The sound pressure level under normal operating conditions is 70dB(A).

SAVE THESE INSTRUCTIONS

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents ER10 Page English French 12-21 German 22-31 Italian 32-41 Dutch 42-51 Important Safety Instructions Table of Contents Overview of the machineAccessories Setting UpAttaching the power cord and foot control Machine speedCloth Presser Fabric and trims that can be used Getting StartedLaundering embellished projects Start Embellishing Accessory Storage Flat Bed Extension / Free ArmMaintenance Changing the needlesCleaning the lint box Replacing the light bulbSpecifications Trouble ShootingNeedle bent or Needle breakage Consignes DE Sécurité Importantes Table des matières Vue d’ensemble de la machineAccessoires Branchement de la pédale de commandeRéglage Vitesse de la machinePied-de-biche Tissus et fils utilisables DémarrageLavage des ouvrages décorés Commencer à coudre Rangement des accessoires Extension à plateau étendu / bras libreEntretien Changement d’aiguilleRemplacement de l’ampoule Nettoyage du compartiment à peluchesCaractéristiques techniques Dépannage’aiguille est pliée ou se casse Sicherheitshinweise Inhaltsverzeichnis Übersicht über die MaschineZubehör VorbereitungFußanlasser anschließen MaschinengeschwindigkeitDruckfuß Erste Schritte Geeignete Stoffe und ApplikationenWaschen gefilzter Projekte Anmerkung Regeln für die „VorwäscheFilzarbeiten Arbeitsflächenerweiterung / Freiarm ZubehörfachPflege Nadeln auswechselnGlühbirne wechseln Säubern des FlusenbehältersFehlerbehebung Technische DatenIstruzioni DI Sicurezza Sommario Vista d’insieme della macchinaImpostazione AccessoriVelocità della macchina Piedino per stoffa Per iniziare Tessuti e rifiniture utilizzabiliLavaggio dei lavori decorati Nota Regole di prelavaggioIniziare a decorare Vano porta accessori Piano di lavoro estensibile / Braccio liberoManutenzione Sostituzione dell’ago o degli aghiSostituzione della lampadina Pulizia dello scomparto filacciaRicerca guasti Dati tecniciVeiligheidsinstructies Inhoudsopgave Overzicht van de machineInstellen ToebehorenSnelheid van de machine Kledingvoet De voet in te stellenAan de slag Geschikte stoffen en versierselsProjecten met wasbare versiersels LET OPWasvoorschriften bij voorwassenBeginnen met versieren Aanschuiftafel/vrije arm Doos met toebehorenOnderhoud De naalden verwisselenDe gloeilamp vervangen Stofbox reinigenHet verhelpen van storingen SpecificatiesPage

ER10 specifications

The Husqvarna ER10 is an impressive electric motorcycle designed for performance, versatility, and eco-friendliness. As part of Husqvarna’s expanding lineup of electric vehicles, the ER10 epitomizes the blend of innovation and practical capability that riders crave.

One of its standout features is the powerful electric motor, which delivers rapid acceleration and exceptional torque. This enables the ER10 to tackle a variety of terrains, from rugged trails to urban settings, proving that electric motorcycles can compete with their gasoline counterparts.

The lightweight frame, constructed from high-quality materials, enhances maneuverability and agility. The simplistic yet sturdy design allows riders to navigate through tight spots and rough terrains with ease. Moreover, the ER10 is equipped with an advanced suspension system that absorbs shocks efficiently, providing a smooth ride even on bumpy surfaces.

Another technological highlight of the Husqvarna ER10 is its battery management system. The motorcycle is fitted with a high-capacity lithium-ion battery that offers an impressive range on a single charge. This means riders can enjoy longer rides without the worry of frequent recharging. The integrated regenerative braking system further contributes to efficiency, allowing for energy recovery during deceleration.

The ER10 also features a user-friendly digital display, providing essential information such as speed, battery level, and trip details. Riders can easily monitor their performance and plan their rides accordingly.

In terms of safety, the Husqvarna ER10 is equipped with advanced braking systems, ensuring reliable stopping power in various conditions. Combined with durable tires that offer excellent grip, the ER10 ensures riders can maintain control, whether on smooth roads or dirt tracks.

The motorcycle’s eco-friendly nature sets it apart in the market. As an electric vehicle, it significantly reduces carbon emissions, making it a sustainable choice for environment-conscious riders. With zero noise pollution, the ER10 provides a tranquil riding experience, allowing riders to appreciate nature without disturbing the surroundings.

Overall, the Husqvarna ER10 is designed for the modern rider who values performance, sustainability, and cutting-edge technology. Its versatile characteristics position it as a top contender in the electric motorcycle segment, appealing to both seasoned riders and newcomers alike. With its combination of speed, handling, and eco-friendliness, the Husqvarna ER10 is undoubtedly paving the way for the future of motorcycling.
Top Page Image Contents