INSERTING THE BOBBIN
When inserting or removing the bobbin, the needle must be fully raised.
1. Insert the bobbin in the bobbin case with the thread running in a counterclockwise direction (arrow).
Attention:
Turn power switch to off ("O") before inserting or removing the 02 bobbin.
A
B
B
A
C
2. Pull the thread through the slit (A).
3.Pull the thread toward the left and along the inside of the spring until it slips into the notch (B) being sure that the thread does not slip out of the slit (A).
4. Pull out about 15 cm (6 inches) of thread and attach the bobbin cover plate. (C)
15