Euro-Pro 9136C manual Darning Stitch

Page 39

DARNING STITCH

D

￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿

Select pattern 16 or 17 to get the darning stitch. Change the presser foot to the buttonhole foot.

StopStop

aa

Start

 

b

 

Start

 

b

 

 

 

 

 

 

 

03

Baste the upper fabric and the under fabric together.

Select the needle position. Lower the presser foot over the center of the tear.

Pull the button holder to rear.

Set the button guide plate on buttonhole foot to the desired length.

The size of one darn cycle is variable.

However, the maximum stitch length is 2.6cm (1 inch) and the maximum stitch width is 7mm (9/32 inch).

a. The length of sewing. b. The width of sewing.

37

Image 39
Contents Page Page Important Safety Instructions Contents Appendix Principal Parts of the Machine Accessories StandardOptional Foot control Connecting the Machine to the Power SourceConnecting the machine Polarized plug informationFunction Buttons of the Machine Reverse buttonAuto-lock button Clear button Needle up/ down position buttonPlease Note Memory buttonStitch width adjustment button Stitch length adjustment buttonMode selection button Mirror buttonDirect pattern selection buttons/ Number buttons Pattern Direct modeLCD Screen Direct PatternDirection Patterns Alphabets Pattern ChartWinding the Bobbin Patterns Inserting the Bobbin Threading the Upper Thread Threading the Upper Thread Using the Needle Threader Cutting the Thread Raising UP the Lower ThreadReplacing the Needle Adjusting Presser Foot PressureNEEDLE, FABRIC, Thread Selection Guide Matching NEEDLE/ FABRIC/ ThreadThread Tension Removing the presser foot Changing the Presser FootAttaching the presser foot holder Attaching the presser footApplication Needle Presser Foot Type of Presser Foot ChartTo Raise or Drop the Feed Dogs TWO-STEP Presser Foot LifterUseful Skills ReverseFree arm Sewing on the heavy fabric Sewing cornersZigzag Stitches Straight Stitches and Needle PositionStretch Stitch Using the overcasting foot Using the all purpose footOvercasting Stitches 5mm5mm Blind HEMButton Sewing Buttonhole Stitching Buttonhole Stitching Making a buttonhole on stretch fabrics Eyelet Stitch Darning Stitch Darning Stitch Inserting a centered zipper Zipper InsertionZipper Insertion Narrow Hemming Cording Single cordingTriple cording Satin Stitch Sewing Quilting Scallop Stitch Scallop hemScallop edging Gathering Gathered fabricTo gather and attach gathered fabric in one step Smocking Darning Free Motion Darning Embroidery and MonogrammingMonogramming EmbroideryPatchwork Stitching FagotingMirror Twin Needle Walking Foot Combining patterns or letters MemoryTo the Direct mode Adding patterns or lettersClearing patterns or letters Recalling and sewing the memorized pattern Instruction animation message display Bobbin winding BH lever is not loweredReplacing the Light Bulb MaintenanceCleaning the hook Problem Cause Correction Trouble Shooting GuideTrouble Shooting Guide Quick Adjustment Reference Chart Direct patterns-10Patterns-100 ~7.0 ~1.0 Satin Stitches ~3.0 Cross ~4.5 Decorative ~7.0 ~3.0 Year Limited Warranty 021D9A0103 May/07 Euro-pro 9136C9200A9