Adjusting the Foot Pressure
The foot pressure control dial should be set at “3” for
regular sewing.
Reduce the pressure to “2” for applique, cut work,
drawn work and basting.
Set the dial at “1” when sewing extra fine fabrics.
Foot pressure control dial
1 Setting mark
1
Dropping the Feed Dog
1
The feed dog will automatically drop when the basting stitch, button sewing or the embroidery mode has been selected.
The feed dog can also be lowered by the drop feed lever for sewing on buttons, manual embroidery. Push the drop feed lever to the left to lower the feed dog.
Push the lever to the right to raise the feed dog, it will return to the up position when starting the machine.
1 Drop Feed Lever
2 Down position
3 Up position
|
|
|
|
| NOTES: |
|
|
|
|
| The feed dog should be in the up position for normal |
|
|
|
|
| sewing. Turn the handwheel toward you to check if the |
|
|
|
|
| feed dog comes up after setting the lever in the up |
|
|
|
|
| position. |
|
|
|
|
| |
|
|
|
|
| The feed dog will automatically drop when the |
|
|
|
|
| |
2 | 3 |
| embroidery mode, basting stitch, button sewing. has | ||
| been selected. | ||||
|
|
|
|
|
20