Janome 9500 manual Key Position Adjustment

10	Key Position Adjustment	Yes
11	Free Arm Length	SET
	Maximum Speed Set
12	650spm
	+
13	Sewing Light
	Register
	(A)

Key Position Adjustment

PRESS MARK (+)

(B)

Key Position Adjustment

END

10 Key position adjustment

If you think the touch panel keys are out of alignment, you can calibrate them in the key position adjustment window.

When you press the Yes key, window (A) will be shown. With your finger, press the crosses as they appear in order. When you press the last crosses, the window (B) will be shown.

11 Free arm length

The carriage will move allowing you to use the full length of the free arm, when you press the key.

Press the key to return the carriage to its home position.

12 Embroidery maximum speed:

The maximum sewing speed can be changed from 400 to 650 spm for embroidery sewing.

The default setting is 650 spm (stitch per minute).

Press the Minus	key to reduce the maximum sewing
speed.
Press the Plus	key to increase the maximum sewing
speed.

NOTE:

Reduce the sewing speed when sewing patterns with narrow zigzag stitches that tend to distort at high speed.

13 Sewing light

You can turn the sewing light on or off by pressing the sewing light key.

	Thread selection
14	Robison-	Madeira	Mettler
	Janome Anton
	Format		SET
15	Built-in Memory		Yes
16	ATA PC Card		Yes
17	Reset all to defaults		Yes
	Register

14 Thread selection

There are four brands of embroidery thread to choose from. Press the key of the thread you wish to use. The color code of the selected brand will be shown on the color/part key along with the name of the color.

Formatting the memory

If the internal memory or ATA PC card does not function due to damage to the memory bank, you need to re-enable it by formatting the memory.

15To format the internal memory, press the Yes key next to Built-in memory.

16To format the ATA PC card or Compact Flash, press the Yes key next to ATA PC card.

NOTE:

Formatting will erase all data stored in the memory.

17 Reset all to default

Pressing the Yes key will return all settings except for language to defaults (the same settings as when you purchased the machine).

24