NEC C944 manual Menu System, Registering Handset to

Registration Code

Registering the

Handset to the

DECT System

Selecting the DECT System

20 Menu: System

The handset can be operated with a maximum of 10 DECT systems. Before you can make a call via the DECT system, the handset has to be registered to the respective system. A sys- tem ID and registration code may be necessary for the registra- tion process. Ask the respective system administrator for the valid registration code. When the handset is not yet subscribed to the system the display is showing ”No subscription”.

All settings in this chapter are started by pressing the softkeys:

Menu System OK

Then select…

Subscription OK Options New / OK F PARK

OK F PIN (Authentication code) OK F System name OK

FLocal phone number OK

The following entries must be made when logging on:

Enter PARK	: a system ID should only be entered
	if you are at a location where two
	DECT systems overlap. If only one
	DECT system is available, then just
	press OK.
	: this code is used to register the
Enter Auth.Code
	handset (authentication code). The
	DECT System supplies this code.
Enter System Name	: give the name of the DECT system
	to which you are registering. This
	will be shown on the idle display.
	For information concerning the
	entry of characters, refer to ”Enter-
	ing Characters / Names”.
	: the phone number, assigned to
Enter Local Number
	your DECT handset can be entered
	here (ask your system administra-
	tor for the phone number).

Subscription OK select a System Options

Select OK

If the handset has been registered to several DECT systems, then you can select which one the handset is to use. Select the system via the arrow keys before confirming ”Select”. By choosing Options Select , the function automatic search is disabled. The selected system is shown in the idle display.

39