Janome MC 200E manual When the upper thread has broken or run out while sewing

Page 28

4 5 6

7

w r

v Lower the presser foot. Press the Start/Stop button and sew 5 to 6 stitches.

b Press the start/stop button again to stop the machine. Raise the presser foot. Trim the thread.

n Lower the presser foot and press the start/stop button. The machine will sew the first color section and stop automatically when it has finished.

m Change the thread and sew the next section.

When the upper thread has broken or run out while sewing

zRaise the presser foot and rethread the needle thread.

* If the carriage position makes threading difficult, you can move the hoop for easier threading by pressing the home position key q.

After rethreading the needle thread, press the home position key q again to return the carriage to the previous position.

q Home position key

x Press the stitch back key w or stitch forward key r to move the embroidery hoop to where the thread

qhas broken or run out e

Press the stitch back key once w to move the hoop back by 10 stitches.

wStitch back key e Broken point

r Stitch forward key

c Lower the presser foot, and press the start/stop

e

button and sew 5 to 6 stitches. Stop the machine and trim the thread.

vPress the start/stop button and start the machine

again.

26

Image 28

Contents Instruction Book Important Safety Instructions Table of contents Name of parts Standard Accessories For Your Safety Connecting the power supplyPolarized plug for U.S.A and Canada only Start/stop button Presser foot lifterSetting the spool of thread Winding the bobbinRemoving the bobbin Additional spool pinWinding the bobbin Inserting the bobbin Threading the machine Needle threader Drawing up the bobbin thread Changing the needle Adjusting the thread tension When the needle thread tension is too tightWhen the needle thread tension is too loose Balanced thread tensionStabilizers Adhesive Iron-on stabilizerTypes of stabilizer UsageAdjusting the brightness of the LCD screen Function panelEditing key File save key0Delete key 1SET keySetting mode Machine settingsMaximum speed Buzzer soundThread selection Key position adjustmentFormatting the memory END Default setting Language SelectionHelp key Setting the fabric in the embroidery hoop To attach Attaching the embroidery hoop to the machine To remove Ready to sew screen Selecting built-in designsColor list screen Starting to sew embroidery Colors 90x99mmWhen the upper thread has broken or run out while sewing Selecting fonts Lettering embroideryEntering characters Green a To enter lettering For example GreenPlacement of lettering embroidery Maximum number of charactersReady to sew screen Color changeDeleting a letter To view a long letteringInserting a letter Editing mode Selecting the hoop100% Magnifier key Flipping the patternResizing the pattern Rotating the patternCombining patterns For example pattern #51 and lettering Select the pattern #51 e Press the flip key t Leaf Min Saving in internal memory Saving the fileName of file Same file name exists, overwrite it? Same file name exists, overwrite it? Saving in USB memory Optionl Creating a new folder Opening a file from the internal memory Deleting a fileOpening a file from USB memory Optional Cleaning the hook race Assembing the hook raceProblem Cause ReferenceProblem Cause Reference Design Charts Page Fonts 856-800-005