YOUR KENMORE EDGESTITCHER MAKES MANY TRIMS POSSIBLE
EVEN FEED
FOOT
moves top and
Presserfoot
bottom material screw
together evenly Presserbar
clamp
37
A MOST USEFUL, VERSATILE ACCESSORY
|
|
| This one | attachment | helps you join fabric edges.., | insert lace,.. | |
|
|
| do seam | piping | simplifies blind hemming as well | as "French" | |
1 |
| 2 | seams. Slots numbered 1 to 5 serve as sewing guides, | ||||
|
|
|
|
|
| ||
| 3 | 5 | Set your machine for the stitch you want to use, Then follow these slot | ||||
| numbers | for the task | at | hand: |
| ||
|
|
|
Slot I will guide fabric to be joined to lace. All you have to do is place the lace in s0t 2.
Slot 4 will guide piping being joined to fabric edges. Place the fabric in slots 2 or 3.
Slot 5 may be used as a guide when sewing French seams which are stitched twice, once on right side and once on other side, This is the classic seam for sheers.
Use slots I and 3 to guide fabric with ease during blind hemming. (For details on this technique, see p. 19.)
The even feed foot enables you to sew
Presser footleather, ultra suede TM , shiny fabrics {vinyls, patents and satins), bonded fabrics, pile fabrics and matching stripes, plaids and patterns, It is not recommended for use when stretch stitching,
To attach the even feed foot;
1.Rinse needle to its highest position.
2.Raise presser bar to its highest position and guide the even feed foot into position from rear of machine.
3.Attach presser bar clamp to presser bar and lift presser foot lock as high as it will go to hold the foot securely.
4.Attach screw (A) provided with the foot to needle clamp through fork arm and tighten it.
Note: Attach the foot in exact order of steps as written.