Kenmore 385. 17622 owner manual Left Needle Position, Topstitching, Zigzag foot, Stitch selector

Page 21

•Topstitching

Set the Machine

Stitch

I

1 I

Stitch length control red

Stitch selector zone

Straight foot

	Top thread	tension	or
	control 2 to	6
			Zigzag foot

Here'sHow

1.Lower the presser foot.

2.Keep the edge of the fabric next to the right edge of the presser foot.

3.Evenly guide the fabric along this edge to produce an even row of

topstitching 3/8'" from the edge.

SECTION 3. LEARN THE STITCHES

Left Needle Position

Stitch selector

©

The Stitch and Its Uses

Topstitching emphasizes the lines of your garment and keeps seams and edges flat and crisp.

Accent suits or blouses with one or

two rows of topstitching around the outer edges of cuffs, lapels or collars.

NOTE: You can easily adjust your needle from center to left for

topstitching without moving your fabric from under the zigzag presser foot.

Use Left Needle Position for more

control while topstitching or edge

stitching difficult fabrics.

NOTE: Use only zigzag presser

foot for Left Needle

Sewing.

19

Image 21

Contents Sewing Machine Kenmore Sewing Machine SEARS, Roebuck and COSewing machine KeepTable of Contents Locate and Identify the Parts Portable Case or Cabinet is AvailableIdentify the Accessories Foot Control Use Foot control is sensitiveAdjust the Presser Foot Lever Thread Cutter Section Prepare Machine for Sewing Choose Needle and ThreadTo Changethe Needle Stretch Clutch knob inside the hand wheel Thread Wind the BobbinEnd WindingPrepare the Top Thread Thread the Needle Pick Up the Bobbin Thread PresserHold top Adjust the Top Thread Tension Reverse Stitch Control To reverse stitch, hold down this control duringRelease to sew forward again Raise the needle to its highest position Stitch SelectorLength control Built-in Adjusting Stretch Stitch Balance Stitch Length Control =H--1-1-3-,- !t lJ Preparethe Machineforsewing Straight Stitches Topstitching Left Needle PositionZigzag foot Stitch selectorSew in a Zipper Set the Machine Fold back the left seam allowance As shownStitch Stitch length Stitch selector control Control 3 toInvisible Zipper and Cording Plate Needle plate PutRemove presser foot and stretch fabric Between embroidery hoops with holeZigzag Stitches Sure Section Learn StitchesFalls Edge of the appliqueSew about five stitches and raise needle Sew a ButtonZigzag Stitches Overcasting Stitch That the stitching will catch both sides Zigzag Stitches Three-Step ZigzagSelector retease Trim excess fabric close to stitching Section Learnthe StitchesCalled Shetl CanBox Stitching Set the Machine Decorate with Geometric Patterns Set the Machine Fagoting StitchSelector release Stitch length Green zoneRick-Rack Stretch Stretch Stitches StraightStretchRaveling With the stitch length at 4, sewFabric Needle Effectively PreventsSkipped stitches St=tch Herring Bone Stretch Decorative Stretch PatternsSelector From EdgeButtonholes Sewing at Check bobbin Breaking Bobbin ThreadLint in bobbin case or shuttle Machine Jamming Knocking NoiseWhat to Do When When starting a seam be sure to draw both threads underNicks or burrs at hole of needle plate Choose correct size needle for thread and fabricReplacing the Light Bulb Cleaning the Machine Clean the Feed DogsUnplug Lever Oiling the Machine Parts List Index Adjusting stretchWarranty AppearSEARS, Roebuck and CO., D/817 WA, Hoffman Estates, IL SEARS, Roebuck and CO., Chicago, IL60684 U.S.A Sewing MachineSurplus oil is absorbed Stitch SelectorBrown pOS T on Brown PosITIONBorroM Threading TensionDogs to remove accumulated dust and lint Which may cause Noise or JammingSewing Machin E Part Description Optional Feet and Attachment Sewing Machine Source Model noOrtant