Setting up the sewing computer | 11 |
Sewing table
Increases the sewing surface.
To attach
• raise the needle and presser foot
• place the table over the free arm and press firmly so that it engages on the fixing cam
To remove
•raise the needle and presser foot
•pull the table out of the fixing cam
•pull in horizontal position to the left
Scale
•«0» corresponds to the centre needle position
Seam guide
•insert into the groove (under- side of table) from the right or left
•it can be freely adjusted over the whole width of the table Note: Remove the presser foot when attaching the seam guide!
Free-Hand-System (FHS) presser foot lifter* (knee-operated)
Attaching the presser foot lifter
Insert into the opening in the base plate: you should be able to operate the lifter with your knee in your normal sitting position.
Note:
The presser foot lifter raises and lowers the presser foot
•push to the right
•the presser foot is raised
•the
•the
Your dealer can adjust it if | * Special accessory can vary from |
necessary. | country to country |
030529.52.04_0303_a135 a145_EN